Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: QRPP TX

To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: QRPP TX
From: "John Sexton" <computernetworks@go.com>
Date: Fri, 12 Oct 2001 01:55:48 -0700 (PDT)
Reply-to: rsgb_lf_group@blacksheep.org
Sender: <majordom@post.thorcom.com>
Hi Walter, Ko, Steve, Dave,
The mystery deepens. Some initial confusion about whether it was Walter's test 
signal, but now we know it was not, I shall monitor 137.0 +/- over the next few 
days and try to catch a picture. Signal strength and direction (I have two 
loops) should give us an idea of the source.
Ko's picture did not quite look like what I saw, which showed a frequency 
rising rapidly on keying to an unsteady level. The gaps were irregular and too 
short.
73, John, G4CNN


-----Original Message-----
From: "Walter Blanchard"<blanch@pncl.co.uk>
To: rsgb_lf_group@blacksheep.org
Date: Thu Oct 11 14:06:07 PDT 2001
Subject: LF: QRPP TX

At 21:24 11/10/01 Thursday, you wrote:>>Hi Walter.
Guess my earlier posting is solved by now, i hope.
 ur still -52.8dB on Spectran :-)
73 Ko, NL9222
Sorry, no. Have never been on 137.7 or sent anything like ur Spectran shot. 
Haven't been on air since 1730 UTC.
Wasn't me John CNN heard either. TF 2008 only has very slow drift maybe 1 
Hz/2 hrs. And time doesn't match.
Am monitoring signal via MB7LF and (mainly) Spectran so see immediately if 
anyone comes up. I even listen occasionally.
Have had to shift freq several times to avoid other stns obviously (and 
understandably!) not hearing me.
This relay is excellent for setting up 
Spectran/Speclab/Hamscope/Spectrogram/Easygram constants.
And nice to fiddle with Tx and confirm results straight away.
To get relayed frequency from MB7LF spot on set 2m receiver to 144.986.115 USB.
Walter G3JKV.




___________________________________________________
GO.com Mail Get Your Free, Private E-mail at http://mail.go.com



<Prev in Thread] Current Thread [Next in Thread>
  • LF: QRPP TX, Walter Blanchard
    • Re: LF: QRPP TX, John Sexton <=