Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Re: 73kHz crossband

To: [email protected]
Subject: Re: LF: Re: 73kHz crossband
From: "Rik Strobbe" <[email protected]>
Date: Mon, 20 Mar 2000 12:01:32
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: <[email protected]>
At 09:01 20/03/00 GMT, G3LDO wrote:
What I need is a relay that will short out the 72k section of the loading coil receive, so the contacts have to stand many thousands of volts!

Try a HVK1/2 relais, Specifications say 8kV (dc) switching voltage.
I used it at work upto 15kV (at 8kHz) when it was swiched 'cold' (remove
signal -> switch relay -> put signal back on). I think that is the way you
intend to use it.
This relays (in various configurations) can be found in the Farnell catalog
under order codes :
910-855 for SPNO - 5V with push on terminals
910-867 for SPNO - 12V with push on terminals
910-879 for SPNO - 24V with push on terminals
910-880 for SPNC - 5V with push on terminals
910-909 for SPNC - 24V with push on terminals
910-910 for SPNO - 5V with flying leads
910-922 for SPNO - 12V with flying leads
910-934 for SPNO - 24V with flying leads
910-946 for SPNC - 5V with flying leads
910-960 for SPNC - 12V with flying leads
They cost arround 50 Euro.
You can check Farnell on the web : http://www.farnell.com

73, Rik

PS : SPNO = single pole normally open / SPNC = single pole normally closed




<Prev in Thread] Current Thread [Next in Thread>