Former Seefunker in Germany sent a proposal to RegTP ( Regulierungsbehörde ... ) too. The proposal is speaking about the use in Museumships Please be most patient vy 73 Uwe -- Original Message -- Fro
Uwe...would this be a proposal for amateur radio use of the 600m spectrum or for some other purpose? Steve / VE7SL Former Seefunker in Germany sent a proposal to RegTP ( Regulierungsbehörde ... ) too
Dear Steve and All, let me tell you a little bit about DI2AG on 440Khz. I am ham now since 51years and was always interested in HF-propagation, from UHF to LF and MW as well. As we do not have an ama
well, CW- only - RegTP does not respond to any writing. ( I should asked again and remind the eggheads ) As long as +/- 500 kHz is used somewhere in the world, it will be most doubtful. See the simil
Dear Walter, would You please so kind in sending me a QSL- Card ? I wrote an Article in 7/CQ-DL about my experiences in receiving DI2AG. I also send you some screenshots before (remember the failure
Dear Uwe, QSL will de sent directly. Excuse. Hope your adress is ok on my CD. 73 Walter --Ursprüngliche Nachricht-- Von: Uwe Wensauer <[email protected]> An: [email protected] <rsgb_lf_g
Dear Steve, the RS1003 was in use in telecommunication transmitters. It delivers up to 100W on 100MHz with 800V. I used it 1957/59 as PA, when we had a permit for the 70,2-70,3MHz-band in the IGY ( I
Thanks Walter - this is most helpful. Dear Steve, the RS1003 was in use in telecommunication transmitters. It delivers up to 100W on 100MHz with 800V. I used it 1957/59 as PA, when we had a permit fo
Dear Tom, nil, absolutely nothing here on 1919.2 kHz, at only 50 km from you! Tried a few times, both day and night. Same result at the QTH of Walter, DJ2LF when he looked yesterday. Too far for grou
Hi Walter, I will assemble something today to receive the 44O kHz in PSK , I will record the next night, 73 Jean-Pierre F1AFJ in JN06ht -- Original Message -- From: [email protected] Walter
Walter, Is this is you about 1.5 Hz high ? Too weak to decode on PSK 31. Walter G3JKV IO91UF. -- Original Message -- From: [email protected] Walter Staubach To: [email protected]
Dear Jean-Pierre, thanks for your info. I am curious what will happen. 73 Walter --Ursprüngliche Nachricht-- Von: Jean-Pierre Méré <[email protected]> An: [email protected] <rsgb_lf_grou
Dear Walter, thanks for the screenshot. At what time did you take it? The modulator and the software was built by Markus, DF6NM, and installed at about 22utc yesterday evening. I think the weak signa