Thank-you Victor for the very clear copy. The TX shut down overnight when a fuse became dislodged in the power supply. Also at one point during an aerial tuning session, the TX keyed when the aerial
Thank-you Nicolas,, Good to hear from you again. 73 Joe Hello Joe, good conditions last night. F4DTL Nicolas JN18FP RX : Icom IC7400 Ant: Miniwhip _http://lfistes.erst.azerttyu.net/_ (http://lfistes.
Thank-you Warren and sorry Group, Yes, 184 kHz is down for the moment. Any reports on 507.77 kHz will be appreciated. The TX is a class E but only 100 watts. With Alan's spread sheet, it was straight
Thanks to Gary and Victor for the recent last night and Nick for the previous night. Due to a threatening storm with freezing rain in the forecast the beacon will be off thonght. Thanks to all for mo
Hi Joe. Just place a suitable resistor in the dc feed to the FET so that when the max FET current flows there is 0.7v across this resistor, then connect the base and emitter of a transistor across th
Hello Joe,lf first signs from your signal at 10:00z capture 6:10z 73 Victor --Oorspronkelijk bericht-- Van: [email protected] [mailto:[email protected]]Namens jcraig
Hello Joe,lf first signs from your signal at 10:00z capture 6:10z 73 Victor --Oorspronkelijk bericht-- Van: [email protected] [mailto:[email protected]]Namens jcraig
Hi Joe, LF, Also had good copy of VX9MRC from 2247utc to 0822utc. 73 Gary - G4WGT - IO83qo On 23 January 2011 08:27, <[email protected]> wrote: Hello Joe,lf first signs from your signal at 10:00z ca
Dear Group, QRV tonight with a CW beacon and 10 s carrier. Reports most welcomed! 73 Joe VO1NA This electronic communication is governed by the terms and conditions at http://www.mun.ca/cc/policies/e
Dear Group, The TX is on with 90W 2.5 amps to the tower until dawn. CW ID and a 10 Second carrier. QTH GN37 Reports are most welcomed. 73 Joe VO1NA This electronic communication is governed by the te