Gary, I am using a ceramic resonator VXO intended for normal CW. It drifted a bit earlier but seems to have stabilzed now. I re-tuned, now just 2Hz up from Andy. 73, Rik ON7YD - OR7T Rik, I make your
Rik, I make your signal 14Hz lower than Andy at the moment & not getting a hit on the beacon Rx here. Gary - G4WGT. Hello Dave, chances might be better with a QRS viewer. Or if the beacon software ca
Hello Dave, chances might be better with a QRS viewer. Or if the beacon software can share the soundcard you can run both. VXO is still drifting a bit, I adjusted it to 503705Hz at 21:45 utc. 73, Rik
There is not really any such thing as a hit with this "monitoring software" - it is not a logger as such, just an estimate of the frequency of a peak stable in a narrow bandwidth when measured over t
Hi Rik, LF, As the stability of your VXO improved there were many more hits. The log extract below covers from the 2004utc to 0534utc period with nothing further from Andy or Rik. My logging was not
Hi Andy, LF, I realise that “hits” is not the correct description but you have answered the question. That is exactly the information I wished to know. Thank you. Gary – G4WGT From:
RR Rik, Will leave RX on 503.7 and beacon pgm. @ standard -240 seconds See you on the blue trace.... TNX from Dave @ WD2XSH/17 Dear all, I just started a QRSS10 beacon on 503.7kHz (right now 503.705
