Lubos, today I've set up my VLF grabber http://www.mydarc.de/df6nm/vlf/vlfgrabber.htm a bit faster (1.9 mHz) to provide a bit of a challenge for your signal ;-) Your "K" is now well visible while the
Gentlemen! Finally, I have stopped about 1700z. Thanks to everybody who was trying to pick up my signal. The test with Lubos, I did this morning revealed some problems in my RX-system which I'm going
Hi Eddie! Finally my signal is visible on your grabber! So I wanted to stop about an hour ago but I will leave it running now for a while. 73 OE3GHB Gerhard Am Samstag, den 10.03.2012, 13:47 +0000 sc
Lubos, it looks like Gerhard is starting up now... http://members.aon.at/grabber/VLF/index.html http://www.ok2bvg.cz/vlfgrabber/ 73, Markus (DF6NM) From: [email protected] Lubos OK2BVG Sent: Sunday,
Hi Stefan ! The maximum antenna current was about 500mA but at this power the transistors got very hot, showing that there is still something wrong with the matching. My usual PA has an output resist
Hi Lubos, Gerhard, Very nice. I saw both of your signals in my "6000" and even in the "600" window, http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_VLF_Grabber.html. VLF propagation is exceptiona
Hi Stefan! Not sure about the settings. Basically I used the template of my VLF-Grabber for the 6000-Window and adapted the setting accordingly. Actually, the file in the attachment was my QRSS100 se
Hello Mal! That´s fine, you are ready for my VLF test. Your antennas must be very good, when you see my signal in DFCW600 window. Thank for the information! Would be a problem to send me a snapshot o
We are all begging for more :-) Eddie On 10/03/2012 12:50, Stefan Schäfer wrote: Hi Lubos, Gerhard, Very nice. I saw both of your signals in my "6000" and even in the "600" window, http://www.iup.uni
Hello Eddie, group! Thank you for watching out. Unfortunately I had no luck today. There is nothing of my signal seen on your grabber. Lubos left a clear trace. I noticed that my signal is fading out
Wonderful! I like the daily short stories about the various technical challenges on the different sites. Also the weak and sloooooow but visible traces on a wavelength of 33444m are very relaxing :-)
Hello Markus! I also thought about a coupling of antennas after playing around for a while in SpectrumLab. I had to set up the DFCW30 Window because I usually do not run one on my grabber. The signal
Stefan where is the signal on ur grabber I cannot see it ????? I have a good visible trace in dfcw 600 g3kev -- Original Message -- From: [email protected] Stefan Schäfer To: rsgb
Hello VLF! If the weather is as nice as today, I will be active on VLF tomorrow: **INFO** Date: 12.03.2012 Time: 08:00 UT - 11:00 UT Antenna: Marconi L 24m up + 220m top load PA: 120W Identification:
Hi Lubos, Gerhard, thanks very much for those tests! It is a real pleasure to see your two signals side-by-side, in very good quality in my 0.48 mHz window. The QRN was not at its best yesterday. Pit
Hello Markus! Yesss, I have seen my signal on your grabber. I am pleased! I just finished "K". The weather is still perfect, so I will go my transmission on. The another "K" will be transmitted. 73!
Hello Gerhard, If possible, please wait for a while with the QRT and see what sunset does with the signal. 73's, Peter PA1SDB Hi Stefan! Again, I just had the intention to switch off but consdering y
Hello VLF friends! Thanks for all reception reports. I am glad, that my signal was seen by Gerhard/OE3GHB, Markus/DF6NM, Eddie/G3ZJO, Mal/G3KEV, Stefan/DK7FC and Paul in Todmorden. I haven´t a plan t
Hi Gerhard Yes I think there may be traces of pixels of your signal but I could be "Dreaming" thank for you efforts I look forward to you advances in field strength. Your next mail arrived before I l
Hi Gerhard, The file is OK at least. 73, Stefan Am 11.03.2012 18:26, schrieb Gerhard Hickl: Hi Stefan! Not sure about the settings. Basically I used the template of my VLF-Grabber for the 6000-Window
