Just think topband with the dimensions scaled accordingly, you were therefore using a 50ft inverted L with a less than 2m high vertical section getting lower.... and 12W. I think a kite is the only w
Hi Richard. I've used a system similar to yours with some success. Mine, now dismantled, is detailed at http://www.g0mrf.com/500kAntenna.htm It was a 10m mast with a very small 3m top section. Power
I've used a system similar to yours with some success. Mine, now dismantled, is detailed at http://www.g0mrf.com/500kAntenna.htm It was a 10m mast with a very small 3m top section. Power in 7.5W PEP.
Not a great success. Tried a 200ft inverted L with 7m vertical section fed against 3 radials each between 50 and 100ft long. The final 100ft was very low - within 1 metre of the ground. Did not succe
Did not succeeded in tuning aerial up in link configuration. Tried tapping the feeder at various points on the main coil but this reduced the Q dramatically and the RX and TX performance were very p
Hi Richard, I must commend your efforts to go portable. However there seems to me to be one major problem. That is GROUND, all antennas except loops (more later) need to work against "Ground" which i