Hi Stefan, Group
Thank-you for the fine QSO. Sorry but the rectifier in the 20A 60V power
supply unfortunately became a member of my late semiconductor club just as
the final K was being sent. Your sigs were quite audible on your last
over -- fantastic considering the rudimentary RX set-up here!
For TX, the usual Marconi XH100 was used to excite the Decca amp
which fed 5 amps RF to a 100m wire at ~15 m average height.
The attached ARGO screens show Stefan's QRSS4 sigs as received here.
73
Joe VO1NA
On Sun, 26 Aug 2012, Stefan Schäfer wrote:
Hi Joe,
Many thanks for the QSO, it was a pleasure!
I never saw such strong signals from you in 4405 km distance
(http://no.nonsense.ee/qthmap/?qth=GN37OR&from=jn49ik). Excellent condx! Or
have you added some dB on your side? The signal was solid and stable during
the complete QSO, mostly arround 25 dB S/N, even better than in January this
year. QRSS-3 would have been possible too.
First i tried to answer you in slow hell (3s) but obviously i have been to
weak for that.
Capture: https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC.jpg
https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC_2.jpg
https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC_3.jpg
There must have been a problem or QSB at the end. Hope the setup still works.
I would be interested in captures as well, if you have some :-)
73, Stefan/DK7FC
Am 26.08.2012 01:38, schrieb Stefan Schäfer:
Joe,
You're leaving a big signal here in a QRSS-10 window! Like to try a QSO?
:-)
73, Stefan/DK7FC
This electronic communication is governed by the terms and conditions at
http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php
dk7fc_na_r12_1.jpg
Description: JPEG image
dk7fc_na_r12_2.jpg
Description: JPEG image
|
