Re: LF: 136 kHz TA

[f6hcc 56 <f6hcc56@free.fr>]

----- Original Message ----- 
From: DK7FC
> You're receiving us with an indoor loop without a preamp?? :-)
Yes, but when I adjust the CV on the correct frequency the noise increase...
I think the sensibility is good ?
(there is a coupling loop 1 turn in the center to connect the FT817)

> Yes, the FFT bin width is 42 mHz. Just increase the input divisor to 32, so 
> you're coming out at 21 mHz. This will help a bit.
Ok 21 mHz now and I found "double width water fall line" more easier to see 
the signal :)
For more and individual advice we can, if you like, do a Teamviewer remote 
session where i can show you some more adjustments.
Tnx, Stefan, but not easy, I am on a mobile link (no ADSL here, radio only, 
:))
> BTW now i'm TXing again to VK so there is a test signal ;-)
Ok Stefan I received your signal.

Now I think SL has correct settings.
I just finished to repair my variable capacitor.

I start the grabber 137 kHz for stn who want to see their sigs

http://f6hcc.free.fr/grabber.htm

73, John / F6HCC