Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Multi-layer loading coils

To: [email protected]
Subject: Re: LF: Multi-layer loading coils
From: "James Moritz" <[email protected]>
Date: Wed, 31 Oct 2001 10:32:12 +0000
In-reply-to: <000a01c16187$aec96d00$49c928c3@ericadodd>
Organization: University of Hertfordshire
Reply-to: [email protected]
Sender: <[email protected]>
Dear Peter, LF group,

I also got one of the Decca loading coils - mine was from the scrap pile at Puckeridge, and was of the old type with the difficult-to- solder litz and the former solvent glued together, and so not possible to dismantle without breaking many parts. Mine had 12 wires in parallel and L of a few hundred uH, so not very good for my antenna, which needs about 4mH to resonate on 136k.

In the end, I just used the wire from the Decca coil and scrapped the rest. As a former, I found a "sectional manhole" made by Osma was very suitable. This is a brown PVC cylinder about 500mm diameter and 350mm long, with external ribs. It is meant to form the walls of manholes for drains, and several sections can be slotted together for a bigger former if needed.

About 6 turns of the Decca litz wire fit between each pair of ribs, forming a winding 3 layers deep by 2 long. about 80 or so turns altogether gave me the required inductance, which has a Q of about 700. I tried several experiments and found that in all practical cases, single layer windings gave higher Q than multi-layer ones, and have the advantage that there is the maximum seperation between the two ends, which may have upwards of 20kV between them when running 1.2kW. However, a single layer coil using the thick Decca wire would have been very large - about 2 or 3 metres long using the sectional manholes - so the configuration above, which is effectively 14 x 6 turn windings in series, each 3 deep, is a reasonable compromise between Q, L, and size, and keeps the voltage between adjacent turns below 1kV if wound carefully. This has been working happily for the last year or so. I am using a second sectional manhole wound with more turns of smaller, ordinary stranded wire for 73k, which stacks on top of the 136k loading coil.

As others have pointed out in the past, big loading coils only give minor improvements in antenna efficiency - but the main reason for having one is so that it does not melt, catch fire, etc when running high power. This one barely gets warm at the 1.2kW level.

Cheers, Jim Moritz
73 de M0BMU



<Prev in Thread] Current Thread [Next in Thread>