Thank you Jim
As usual .. all is not as expected .. looking at the R1 source box ,
I seem to only have the Left channel .. the same as the L1 box
for the left channel (active)
The card is a usb RDX-150 device and the driver simply shows as
USB audio CODEK , Tx wise I have the same audio from L and R .. Rx ,
only audio from the LF is showing .......odd ... may be the card is
u/s but its odd the tx is l/r ...
fine ....
tnx - G .
--------------------------------------------------
From: "James Moritz" <james.moritz@btopenworld.com>
Sent: Saturday, June 26, 2010 2:29 PM
To: <rsgb_lf_group@blacksheep.org>
Subject: LF: Re: spec lab display left or right ch ?
Dear Graham, LF Group,
The soundcard input to the spectrum analyser can be selected via
"view/windows > spectrum lab components(circuit window)" then clicking on
the input to spectrum analyser 1 (where it says "L1" by default), and
choosing the option you want. If you click on the "spectrum analyser 2"
box, you can start up another waterfall, with a different input (you might
also want to use the "find window" option!). You could also have two
seperate instances of Spectrum Lab running.
Cheers, Jim Moritz
73 de M0BMU
----- Original Message -----
From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
To: <rsgb_lf_group@blacksheep.org>
Sent: Saturday, June 26, 2010 1:44 PM
Subject: LF: spec lab display left or right ch ?
Spec lab display left or right ch ?
Is there a way to 'flip between the display of the left and right
ch from a stereo sound card ?
I can see reference to L and R but how to access the plots ?
Or can the left and right be shown at the same time as separate plots
... better option if possible
Im sure I have used 2 plots , but I think this was a expanded view of
one ..
Tnx - G .
|
