Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: LF: ICOM IC706

from [James Cowburn] [Permanent Link][Original]
To: "[email protected]" <[email protected]>
Subject: RE: LF: ICOM IC706
From: James Cowburn <[email protected]>
Date: Fri, 29 Sep 2017 16:36:47 +0000
Accept-language: en-GB, en-US
Authentication-results: blacksheep.org; dkim=none (message not signed) header.d=none;blacksheep.org; dmarc=none action=none header.from=outlook.com;
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version; bh=zyRAwuJT3mmzmKukk/wbvu0LIh3BWkEhj4+CxAWFAu0=; b=aTM6zqdot7BuC52GX+Gkr5JlTxwEVvKMXH+Qrea4Xf0HctnHmipmxleT30nryfmM0ceyRDUkBlSx5/AYrTl1SS6AWh9zrkDqz9YNpiKHeT2eWm2oaFRY6Kx3cmsR9vL12IAWdpcglL6x+dMAKb9QsGrcSIFG7JEIgWUOfuyAd4RyrZLS2kXiGUCnu4obdlPg34MLgbm3YUrFES3FEIe/ozXOiAaSp2o8LleX4tl/c0aQubtP/SkXq6k61wyv69mWvwOAgxFtLMz1Ox/v/a9fVtCTMrHVYJX1pyKp4BUZAfJg5sx/8A6PWA4NxNyZLNBbsJbaFiC/jJvyShIr56rI1g==
In-reply-to: <390EDEE5587D4DA38A73ED27D683B056@PCPMF>
References: <FF47E81BB2154278B307BADDA36296AC@kenVAIO> <390EDEE5587D4DA38A73ED27D683B056@PCPMF>
Reply-to: [email protected]
Sender: [email protected]
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AQHTOKCCq1TE7wAIMEyXFShYi3zK7qLLlboAgAB7TYA=
Thread-topic: LF: ICOM IC706

Hi All

 

I too have used an opened up 706 mk2g and also a venerable IC 735 to tx on 475 and 137.    The max output on 475 is in the region of 5-10 watts and at 137 a few milliwatts, but with one of the cheap 1w broadband amps on ebay you can get 1w which is ample to then feed into a hafler or similar audio amp

 

An alternative is to use the ELAD FDM duo with the 0dBm output (where the radio covers 1hz to 200mhz ) and then also boost the 1mw output up to 1 watt with a cheap Chinese broadband ebay amp (~ €20) and then feed the output from that into an audio amp set up as per W1TAG etc

 

with best regards

 

 

Jim

 

Dr. Jim Cowburn G7NKS     IO92ub

 

Biggleswade  UK

 

Details on QRZ.com

 

From: [email protected] [mailto:[email protected]] On Behalf Of F6CNI - Andy - JN19QB
Sent: 29 September 2017 10:15
To: [email protected]
Subject: Re: LF: ICOM IC706

 

 

Hello Ken.

 

Here I use my ICOM 706 model MK2 without any modification, for transmitting on 472 and 137 bands.

 

 

On MF it is very important to set the power level to « L » that is the minimum power in the menu. The output power on 50 ohms is about 1.5 Watt. Good signal shape, enough stability for WSPR and all other usual modes, even QRSS 60. I use an external LPF home made.

 

On LF it is also working nice, but the output power is only about 5 dBm… You need some power extra gain for good results HI !

 

Best 73 de Andy F6CNI.

 

 

From: Ken

Sent: Thursday, September 28, 2017 11:21 PM

Subject: LF: ICOM IC706

 

Dear All.

Can  all versions of the ICOM   IC-706 be opened up to TX & RX  on 475kHz?

 

73 Ken

M0KHW           

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: DK7FC VLF carrier, DK7FC
Next by Date:  Re: LF: CW 477.7 kHz, Roelof Bakker
Previous by Thread:  Re: LF: ICOM IC706, F6CNI - Andy - JN19QB
Next by Thread:  Re: LF: ICOM IC706, DK7FC
Indexes:  [Date] [Thread] [Top] [All Lists]