Hi Bob, all,
yes I noticed the QSB last night - perhaps a
bit unfortunate that I had opted for slower speed just then.
On the other hand, I managed
to catch several characters this time. Pretty much the best
here ever since you've started, even without postprocessing.
The longer dots have certainly helped. Last night's results have
been uploaded to the usual folder
df6nm.bplaced.net/LF/74kHz/
The effect of DCF noise cancellation can
be seen in
df6nm.bplaced.net/LF/74kHz/DCF77_PRN_cancellation/sp_both_131207-08.png
(also currently still shown on the 74kHz upload).
Scales are 7.63 mHz and 60.5 seconds
per pixel (50% overlap), and 20 dB brightness range. The top half
is the raw spectrogram, the bottom after noise cancellation. The gap around
Bob's frequency appears to have been one of the clearer parts in the first
place, so the benefit from processing is not very conspicuous there.
For anyone interested in the algorithm,
there's also a pdf printout of the MathCad script:
df6nm.bplaced.net/LF/74kHz/DCF77_PRN_cancellation/DCF2f.pdf
Between 22 and 7 UT, many parts from the
XRS4 transmissions were readable. Traces from Dex also became visible on
74548.5 Hz, between 2 and 3 UT. Compared to former captures,
this is a very satisfying result for me.
In case others want to try: SpecLab FFT
settings can be similar to opds-32 but more decimation is needed for
half bandwidth (0.238 mHz). In opds.ini, center frequency and
decimation should be edited: fc=74550, dec=50331648
.
Best 73,
Markus (DF6NM)
Sent: Sunday, December 08, 2013 5:29 PM
Subject: RE: LF: 74550 12-08
Henny, Victor, Hartmut, Markus, et all; Very up and down-worst
QSB I have seen in a while. Seems it was that way on all the bands,
MF/LF. The slower QRSS120 only made matters worse as couldn't get
full call in before fade out-however, Markus needed slower mode to do some
of his magic-hope it worked out73, Bob
From: [email protected]To: [email protected]Date:
Sun, 8 Dec 2013 10:03:19 +0100 Subject: LF: 74550 12-08
Gm,Bob,Dex,LF
The signals on 74550,
henny cpm
73's Het bericht kan nu met het
volgende bijlagen of koppelingen worden verzonden: capt18 Opmerking:
Sommige e-mailprogramma's staan ter beveiliging tegen virussen het verzenden of
ontvangen van bepaalde bestandsbijlagen niet toe. Controleer de
beveiligingsinstellingen voor uw e-mail als u wilt weten hoe bijlagen worden
afgehandeld.
|