Ok Rik,
Yes ... hihi
Running
USB Dial freq - 501.000 Khz
olivia 250 x 8 centre freq 2000 Hz audio 503 Khz rf
MFSK 16 centre freq 1000 Hz audio 502Khz rf
Tnx - G ...
--------------------------------------------------
From: "Rik Strobbe" <[email protected]>
Sent: Wednesday, February 04, 2009 9:32 PM
To: <[email protected]>
Subject: Re: LF: Olivia 500 x 8 MFSK16 NOW RUNNING
Graham,
I just installed multipsk.
I believe it is the most chaotic programme I have ever seen.
Right now 21:28UTC I hear alternating signals on 502 and 503.
As I am not in the mood of reading the multipsk manual today could you
just tell me what mode is running where and what dial frequency / mode
(USB or LSB) I should set the RX to?
73, Rik ON7YD - OR7T
Quoting Graham <[email protected]>:
Modes changed
MT63 STOPPED
MFSK16 , Centre freq 1000 Hz audio
Approx 15 watts peak per stream
Thanks for reports .. will run this config an hour or so
G ..
--------------------------------------------------
From: "Graham" <[email protected]>
Sent: Wednesday, February 04, 2009 7:39 PM
To: <[email protected]>
Subject: LF: If anyones about , MT63 x 500 Hz and Olivia 500 x 8
running now 1935 hrs
As a follow on to some tests with Gary , with Olivia 500 x 8 and the
original MT63 system
Running two data streams now at about 10 watts per mode , carrier
frequencies are :-
mt63 501.5 to 502 Khz
olivia 500x8 503 Khz +/- 250 Hz
The book says mt63 should not print as well as olivia .....
tnx - G ..
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date:
02/03/09 17:48:00
Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/03/09
17:48:00
|
