Re: LF: ros

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

Mal,

The spots are via internet.

You need set rig for dial freq 500kHz which gives Tx freq 501.500kHz.

Gary - G4WGT.

On 1 September 2011 21:27, mal hamilton <g3kevmal@talktalk.net> wrote:

I am not transmitting only RX but keep getting spots on 14 es 18 Mhz although I have selected 500 Kcs

Got the waterfall but no sigs so far

what  is the freq. I was watching traces before on speclab on 501.5

mal

 

----- Original Message -----

From: Gary - G4WGT

To: rsgb_lf_group@blacksheep.org

Sent: Thursday, September 01, 2011 9:17 PM

Subject: Re: LF: ros

Graham, Mal, 

Just noticed Mal's ID on the ROS display but no signal.

Gary - G4WGT.

On 1 September 2011 21:04, Graham <g8fzk@g8fzk.fsnet.co.uk> wrote:

Yes ..looks  like  in still  have  some  RX problems  .. no   decode  of   Finbar  ..has to  be  noise  , all  the  Rx's  cannot  be  wrong  .

 

G.

From: Gary - G4WGT

Sent: Thursday, September 01, 2011 8:47 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: ros

Mal,

I have just had a 2 way QSO with Finbar EI0CF using ROS.

Graham has given you the link for the software, give it a try.

73

Gary - G4WGT.

On 1 September 2011 20:35, mal hamilton <g3kevmal@talktalk.net> wrote:

Graham

I do not have the software to decode only watching the traces.

de mal/g3kev

 

----- Original Message -----

From: Graham

To: rsgb_lf_group@blacksheep.org

Sent: Thursday, September 01, 2011 8:26 PM

Subject: Re: LF: ros

MAL

 

Take  the digital  dip hihi   , >>  http://rosmodem.wordpress.com/  <<

 

see   what  you  decode  over there , be  interesting  to  see what  happens  with a  good Ae ?

 

At the  moment 

 

EI0CF , GM4SLV , G4WGT , G0NBD ,

 

G..

From: mal hamilton

Sent: Thursday, September 01, 2011 8:20 PM

To: rsgb

Subject: LF: ros

MF

Two stns active 501.5 One vy loud, other weak. Looking only at trace

g3kev