Thanks for all reports over the night . Dual beacon stopped
Hope was of use , mfsk16 may be used in non linear systems
so looks like a good mode for 500 ?
Ive re configured to normal working - rx now active
Station now in FLDIGI ARQ mode running mfsk16 at 503 Khz cent frequency
Pls try connect , mycall set to G0NBD
will leave active till round 2400 hrs
Tnx G..
--------------------------------------------------
From: "Graham" <[email protected]>
Sent: Wednesday, February 04, 2009 7:39 PM
To: <[email protected]>
Subject: LF: If anyones about , MT63 x 500 Hz and Olivia 500 x 8 running
now 1935 hrs
As a follow on to some tests with Gary , with Olivia 500 x 8 and the
original MT63 system
Running two data streams now at about 10 watts per mode , carrier
frequencies are :-
mt63 501.5 to 502 Khz
olivia 500x8 503 Khz +/- 250 Hz
The book says mt63 should not print as well as olivia .....
tnx - G ..
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date: 02/03/09
17:48:00
| 