Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: LF: RF ammeter question

from [Rik Strobbe] [Permanent Link][Original]
To: "[email protected]" <[email protected]>
Subject: RE: LF: RF ammeter question
From: Rik Strobbe <[email protected]>
Date: Tue, 11 Jan 2011 14:14:34 +0100
Accept-language: nl-NL, nl-BE
Acceptlanguage: nl-NL, nl-BE
In-reply-to: <[email protected]>
References: <[email protected]>,<[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AcuxkGq9sst8OmCuS1GXvRByE9GnRgAARLjz
Thread-topic: LF: RF ammeter question
 
73, Rik  ON7YD
 
Van: [email protected] [[email protected]] namens Markus Vester [[email protected]]
Verzonden: dinsdag 11 januari 2011 14:04
Aan: [email protected]
Onderwerp: Re: LF: RF ammeter question

John, the 1N4007 can actually be useful as a varicap replacement to pull an oscillator. 
73, Markus (DF6NM)

-----Ursprüngliche Mitteilung-----
Von: John RABSON <[email protected]>
An: [email protected]
Verschickt: Di., 11. Jan. 2011, 12:16
Thema: LF: RF ammeter question

LF,

I have built the fullwave rectified version of the design shown on page 10.33 of 
the RSGB Handbook 10th edition.  It reads correctly at 25kHz but only show 1/3 
of the correct value at 136. 

Not having any 1N4148 diodes I used 1N4007s.  Might this be the cause of the 
problem?

73
John F5VLF
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: RF ammeter question, Markus Vester
Next by Date:  Re: VLF: Pacific MSKs in Europe, pws
Previous by Thread:  Re: LF: RF ammeter question, Markus Vester
Next by Thread:  Re: LF: RF ammeter question, John Rabson
Indexes:  [Date] [Thread] [Top] [All Lists]