> From:
[email protected]> To:
[email protected]> Date: Tue, 11 Oct 2011 19:37:32 +0200
> Subject: Re: LF: RE: IQ2MI
>
> On Monday 10 October 2011 21:59, Rik Strobbe wrote:
> > Also good O copy of the QRSS signal in JO20IX.
> > CW is 339, QSO would be possible with some patience.
> >
> > 73, Rik ON7YD - OR7T
> >
> > _
>
> Hello Lubos and Rik!
>
> TNX for reports, fine picture Lubos.
>
> Some info about the beacon.
>
> Antenna: the capacitive top loading is 60 meter long, 3 x 0.25 meter spaced
> 2.5 mm2 PVC insulated wire, the vertical section is about 16 meter high, same
> wire, loading coil about 20 T, same wire on 130 mm PVC pipe.
>
> The measured system resistance is about 25 ohm, including radiation
> resistance, coil loss and ground loss.
>
> QRP transmitter, power output is about 0.4 watt. The estimated ERP is about
> 0.025 watt.
> CW ID is IQ2MI, CW followed by QRSS3.
> QRG is 501.306 kHz, xtal controlled.
>
> The beacon is located in our radio club: ARI - Sezione di Milano, we have a
> special permission for 1 watt ERP.
>
> Coming soon the WEB page www.arimi.it
>
> Soon QSO should be possible on Tuesday evening.
>
> 73
> Claudio, IK2PII
>
>
> --
> Claudio Pozzi - Happy Linux User - http://www.qsl.net/ik2pii
>
>
>
>
> --
> Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f
>
> Sponsor:
> Incrementa la visibilita' della tua azienda con le campagne di email marketing di Email.it
> Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid846&d-10
>
