Re: LF: Olivia 500 x 8 MFSK16 NOW RUNNING

["Graham" <g8fzk@g8fzk.fsnet.co.uk>]

Ok Rik.

Thanks for having a go , but can try agen

tnx - G ..

--------------------------------------------------
From: "Rik Strobbe" <Rik.Strobbe@fys.kuleuven.be>
Sent: Wednesday, February 04, 2009 10:25 PM
To: <rsgb_lf_group@blacksheep.org>
Subject: Re: LF: Olivia 500 x 8  MFSK16  NOW RUNNING

> Graham,
>
> despite good audible signals I did not manage to decode the MFSK16 signal.
> Most likely due to my lack of experience.
>
> I am now closing the station to get some sleep.
>
> 73, Rik  ON7YD - OR7T
>
> PS:
> I just noticed a very odd event on 500: a CW QSO (between GI4DPE, 549
> here, and G3GNR, not audible).
>
> Quoting Graham <g8fzk@g8fzk.fsnet.co.uk>:
>
> > Ok Rik,
> >
> > Yes ... hihi
> >
> > Running
> >
> > USB Dial  freq - 501.000  Khz
> >
> > olivia  250 x 8  centre freq      2000  Hz audio    503 Khz  rf
> >
> > MFSK  16  centre freq  1000 Hz audio     502Khz rf
> >
> > Tnx - G ...
> >
> >
> >
> > --------------------------------------------------
> > From: "Rik Strobbe" <Rik.Strobbe@fys.kuleuven.be>
> > Sent: Wednesday, February 04, 2009 9:32 PM
> > To: <rsgb_lf_group@blacksheep.org>
> > Subject: Re: LF: Olivia 500 x 8  MFSK16  NOW RUNNING
> >
> > > Graham,
> > >
> > > I just installed multipsk.
> > > I believe it is the most chaotic programme I have ever seen.
> > >
> > > Right now 21:28UTC I hear alternating signals on 502 and 503.
> > >
> > > As I am not in the mood of reading the multipsk manual today could you
> > > just tell me what mode is running where and what dial frequency / mode
> > > (USB or LSB) I should set the RX to?
> > >
> > > 73, Rik  ON7YD - OR7T
> > >
> > > Quoting Graham <g8fzk@g8fzk.fsnet.co.uk>:
> > >
> > > > Modes changed
> > > >
> > > > MT63   STOPPED
> > > >
> > > > MFSK16 ,  Centre freq   1000 Hz audio
> > > >
> > > > Approx  15 watts peak per stream
> > > >
> > > > Thanks for reports .. will run this config  an hour or so
> > > >
> > > > G ..
> > > >
> > > > --------------------------------------------------
> > > > From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
> > > > Sent: Wednesday, February 04, 2009 7:39 PM
> > > > To: <rsgb_lf_group@blacksheep.org>
> > > > Subject: LF: If anyones about , MT63  x 500 Hz and Olivia 500 x 8
> > > > running now 1935 hrs
> > > >
> > > > > As a follow on to some tests  with Gary  , with Olivia  500 x 8 and 
> > > > > the
> > > > > original MT63 system
> > > > >
> > > > > Running  two  data streams now at about 10  watts per mode , carrier
> > > > > frequencies are :-
> > > > >
> > > > > mt63   501.5 to  502 Khz
> > > > >
> > > > > olivia 500x8  503 Khz +/-  250 Hz
> > > > >
> > > > > The book says mt63 should not print as well as olivia .....
> > > > >
> > > > > tnx - G ..
> > > >
> > > >
> > > > > No virus found in this incoming message.
> > > > > Checked by AVG - www.avg.com
> > > > > Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date:
> > > > > 02/03/09 17:48:00
> > >
> > >
> > > Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
> >
> >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date:
> > > 02/03/09 17:48:00
>
>
> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm


> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/03/09 
> 17:48:00