LF: Re: g3aqc beacon image

[DL4YHF@aol.com]

Hi Uwe and Laurie,

the reason why Uwe's nice picture of Laurie's transmission looks quite sharp 
is simply because the FFT length used there is quite low. This gives nice 
sharp edges of the DFCW signal, but also reduces the spectral resolution.
If you have to dig deep in the noise because you are on the other side of the 
pond, you must use a higher FFT length to have a more smoothing effect (I 
guess ARGO does something like that automatically when set to a "very slow 
QRSS" mode).

So thanks for the picture Uwe, I'd like to know what settings you were using 
when making the spectrogram (my own spectrograms are a little more "blurred" 
if that's the proper word).

73's  Wolf  (DL4YHF; DF0WD)  JO42FD.