Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: RE: Noise cancelling by using optic transmission of RX signals

To: <[email protected]>
Subject: LF: Re: RE: Noise cancelling by using optic transmission of RX signals
From: "Ken" <[email protected]>
Date: Thu, 17 Dec 2009 10:43:27 -0000
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=Received:X-Yahoo-SMTP:X-YMail-OSG:X-Yahoo-Newman-Property:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE; b=P2yd2jz1qbsALyFZiujqho4aaKO6Vne0J6apfY7hxQZugf2rULougcnbpMGldMU9Dcu3/1sU45YhjBwd8Byf8N7ggFZTJjp0mskAm7E7ZvPw8AskqQgKQ5MK99Qt384bmkJ4/2/JPOKYXb6hoHV9EQg3OGR2+037DMjTuXzRgVY= ;
Domainkey-status: good (testing)
References: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]

Optical fibres are fine for transmission and remove all the problems of interference and cross talk at a stroke, but please be careful and observe optical safety precautions when using lasers and other light sources. I worked on optical systems for many years during my time with BT, and optical safety took priority over every thing else. All optical fibres need to have a perfect cleave on the ends, and the connectors be absolutely clean, if you are not launching into an optical connector then alignment will be a problem, similarly at the receive end.


73.
Ken

M0KHW


----- Original Message ----- From: "Horst Stöcker" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 17, 2009 9:01 AM
Subject: LF: RE: Noise cancelling by using optic transmission of RX signals


In theory it's a good Idea which I had some weeks before without working it out.

Years before I also have made tests with FTA (free to air) optical transmissions with a DL2CH-Transceiver and a TRX-Kit by Aatis which is quite much simpler. Even with that it was no problem to link between two points about a few meters.

In this case you should think about an IR-LED. Unfortunately, the Aatis receiver has a photo transistor instead of a diode. But it should be no great deal to modify that.

The problems with FTA optic transmission for this application are imho:
- You have to be sure, that no one can be injured by the laser beam, especially at unattended operation. - Think about how many hours/the beam has it's full power before becoming much weaker. - The optics must be kept clean. This could be a problem if the units are out of reach. - The units have to be mounted absolutely stable. For Example, on a swinging fibre rod you'll never bring a laser beam exactly to the rx area.

I bet, (FTA) optical transmission just changes one problem with a few others.

But the transmission with optical cable seems interesting.

What type of cable do you suggest? I do not think, my TOS-Link cable would stand weather/UV and mechanical conditions outside for a long time.

Horst DO1KHS
___________________________________________________________
Preisknaller: WEB.DE DSL Flatrate für nur 16,99 Euro/mtl.!
http://produkte.web.de/go/02/





<Prev in Thread] Current Thread [Next in Thread>