Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: DXl VLF experiments in 3HD

from [PA1SDB, Peter] [Permanent Link][Original]
To: <[email protected]>
Subject: Re: LF: DXl VLF experiments in 3HD
From: "PA1SDB, Peter" <[email protected]>
Date: Mon, 3 Feb 2014 10:07:10 -0000
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]
Delivered-to: [email protected]
In-reply-to: <[email protected]>
References: <000f01cf1d9e$700b49e0$0802a8c0@acer> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <2C298FA71DBE4891AD19AFA27DEF513B@White> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Hello Jim,
Just in coincidence I was already operating V2.79 B10 [3], but it works perfect here. I use that SKM52 that G0UPL sell's at his website.
It has a pin out with only a 1 PPS output. Befor I did SR-cal at a VLF signal like 22k1Hz, but the 1 PPS signal preforms much better.
I did split the 1 PPS signal with some R's and feeding 2 audio cards with it now.
 
 
 
 
I did QRPp the GPS output with a 3k3R and 180R like this diagram that you find in the Spectrum Lab documentation.
I don't use that 22K resistor (need no NMEA
Otherwise the signal level is to high for the Sound card. I was able to adjust PPS level with adjusting the soundcard input mixer.
 
 
 
 
73's, Peter PA1SDB
 
 
 
 
 
----- Original Message -----
From: hvanesce
Sent: Monday, February 03, 2014 8:34 AM
Subject: RE: LF: DXl VLF experiments in 3HD

Markus,

 

Thank you for the information on SpecLab. Today will be my first attempt to use external synchronization with SpecLab, and my most-accurate time standard has 1-pps and 10MHz outputs. I have hoped to be able to use the 1-pps output for 42uHz (or better if possible) resolution, but something that you or others had mentioned a month ago made me  unsure about the 1-pps interface. Thank you for mentioning the SpecLab update and its performance with 1-pps synchronization.

 

73  Jim AA5BW

 

 

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: DX VLF experiments in 3HD, John Rabson
Next by Date:  Re: LF: 8270.005Hz : 1/2/14 vs 2/2/14, uwe-jannsen
Previous by Thread:  RE: LF: DXl VLF experiments in 3HD, hvanesce
Next by Thread:  Re: LF: DXl VLF experiments in 3HD, Roger Lapthorn
Indexes:  [Date] [Thread] [Top] [All Lists]