Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: ULF: A next step for 970 Hz

To: [email protected]
Subject: Re: ULF: A next step for 970 Hz
From: DK7FC <[email protected]>
Date: Thu, 16 Nov 2017 18:24:33 +0100
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
...today i drove to the company and got that high permeablic strip. http://www.iup.uni-heidelberg.de/schaefer_vlf/VLF/Powercore_H075-18_20mm_Thyssen.jpg
Quite a large amount!
To be continued...

73, Stefan

Am 13.11.2017 16:03, schrieb DK7FC:
Today i searched for suitable materials to build a iron band rod for a coil for 970 Hz.
I learned about kornorientiertes Elektroblech, https://de.wikipedia.org/wiki/Elektroblech or https://en.wikipedia.org/wiki/Electrical_steel
A normal 50 Hz transformer is using 0.5 mm plates. For higher frequencies there are thinner plates available.
I searched for a local company and quickly found this product catalogue:
http://www.lohse-ringbandkerne.de/uploads/downloads/Lohse%20Prospekt%20D_web_2017.pdf

Excellent! They offer 0.23 mm think plates.
Then i sent them an email request and later i had a telephone talk with the chief of the company. I asked if they have maybe even better materials and he said yes, they have a band of the type H075/18/20. This is a band which has a thickness of just 0.18 mm and it is 20 mm width. Since it is grain-oriented it matters how the B field passes through it.
He said that this special band is worse at 50 Hz but can be used to up to 4 kHz!!!!!!!!!!!!!!!!!!!!!!!!!!! So maybe this opens the frequency range from 4 kHz down to the lower ULF!!!! :-)

I got a good price, just 4 EUR for 1 kg but i have to order at least for 100 EUR so i will order 25 kg of that stuff! Already done!

My idea is to build a 0.5 m long rod. One piece of the band will then have a cross section area of  3.6 mm^2. I will need about 1000 to 1500 of these bands in parallel. This should fit into a PVC tube with an outher diameter of 80 mm. Very handy!

I'll keep you informed ;-)

73, Stefan
<Prev in Thread] Current Thread [Next in Thread>