Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: TXing on VLF again, my first homemade linear PA! :-)

To: [email protected]
Subject: Re: LF: TXing on VLF again, my first homemade linear PA! :-)
From: Roland Bruestle <[email protected]>
Date: Sun, 24 Apr 2016 18:56:54 +0200
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows NT 6.1; rv:38.0) Gecko/20100101 Thunderbird/38.7.2
Hello,
I'm on 8270Hz with 0.3A as test transmission.  I hope our signal separation is good enough.
Roland Dl3NDR

Am 23.04.2016 um 18:51 schrieb DK7FC:
Hi all,

Since about 16 UTC i'm transmitting on 8270.00500 Hz again. The antenna current is about 200 mA. It is a first test over a longer time with my new PA.

I have been off the air for a few days now becuase i destroyed my audio amp that i used as a VLF PA. Somehow i started to like the idea of a clean sine wave coming from the PA. Low pass filters are hard to design for VLF, you know. Since i don't like buying and since i didn't find another one in the trash, i 'had to' (actually wanted) to build my own. It is a class-AB PA now running at 20V DC using 2x IRFP064N against ground. Opposite phase drive signals are generated by a small blue ferrite core with 20 quadfilar turns. On the primary side, 2 of these 4 windings are in series. On the scope, the signal looks quite good. The 3rd harmonic is at about -20 dBc, certainly improvable. But it's just version 0.2 now ;-)
A large ferrite core is used to up-transform the voltage to about 220V rms for this power level (i'm not spot on the resonance), also providing galvanic decoupling.

A photo can be found at
https://dl.dropboxusercontent.com/u/19882028/VLF/20160423_184046.jpg
https://dl.dropboxusercontent.com/u/19882028/VLF/20160423_184059.jpg

The PA consumes 3.6A at 20V DC now. Improvements will follow...

The signal will stay on air for a few hours now.

73, Stefan

<Prev in Thread] Current Thread [Next in Thread>