AW: Re: VLF: 8270: now 8269.990Hz

[uwe-jannsen@kabelmail.de]

Markus,
first:         the decode is wrong
second: same procedure today, start of message 16:00:00
third:       pse try the decoder with redundency check (V0.4b)

73
Uwe
PS. the carrier is on the air

 

Von: Markus Vester <markusvester@aol.com>
Gesendet: 01.04.2016 12:04
An: <rsgb_lf_group@blacksheep.org>
Betreff: Re: VLF: 8270: now 8269.990Hz

 

Hi Uwe,

 

unfortunately static level was high, preventing your carriers before and after the PSK from showing up in my spectrogram. The EbNaut decoder produced "GL" at rank 13429 and -1 dB Eb/N0, but I have no clue whether this message is really correct.

 

Best 73,

Markus

 

 

-----Ursprüngliche Mitteilung-----
Von: Markus Vester <markusvester@aol.com>
An: rsgb_lf_group <rsgb_lf_group@blacksheep.org>
Verschickt: Do, 31 Mrz 2016 9:23 pm
Betreff: Re: VLF: 8270: now 8269.990Hz
 

Thanks Uwe. The late evening may not be ideal in terms of QRN background but let's try anyway. I have pushed out the antenna again (half height due to wind), and restarted the VLF grabbers with EbNaut recording since19 UT. 8270.000 is still within EbNaut's bandwidth (+-1/40 Hz) of your QRG so I hope that my new VLF neighbour Roland won't fire up tonight.

All the best,

Markus (DF6NM)

 

 

-----Ursprüngliche Mitteilung-----
Von: uwe-jannsen <uwe-jannsen@kabelmail.de>
An: rsgb_lf_group <rsgb_lf_group@blacksheep.org>
Verschickt: Do, 31 Mrz 2016 6:38 pm
Betreff: AW: VLF: 8270: now 8269.990Hz
 

the carrier is on the air.
there will be a special message for Markus:

start 22:00:00

coding 8K19A

CRC 16

period 40

length 2

duration 04:05:20:00

Have fun
Uwe/dj8wx

PS. rain would stop the transmission automatically.


 

Von: Markus Vester <markusvester@aol.com>
Gesendet: 24.03.2016 00:00
An: <rsgb_lf_group@blacksheep.org>
Betreff: VLF: 8270 March 22

 

 

Yesterday afternoon the noise was fairly moderate, and around 18 UT I caught a good dash in 63 uHz, presumably from DJ8WX. I then attempted simulated EbNaut decodes on the carrier, using 1 and 2 character settings and 40 s symbols. Both resulted in valid asterisk messages, with some more margin to spare for the single character. So far I have never decoded a real message on VLF, and I'd be keen to try...

 

Best 73,

Markus (DF6NM)