Re: LF: Tx test QRSS-30 476.180

["stan, W1LE" <stanw1le@verizon.net>]

Hello Iban,

What software are you using to Rx and process the beacon signals ?

Thanks,   Stan, W1LE    Cape Cod   FN41sr




On 13-May-15 5:11 AM, Iban Cardona wrote:

Hello

Screenshot of 5DOM and very stron singal of IQ2MI/B. 

​

73! Iban

eb3frn

On Wed, May 13, 2015 at 10:42 AM, VIGILANT Luis Fernández <luis@vigilant.es> wrote:

Hi MF

Thank you all for the try. But keep an eye aearching from time to time

I'll keep txing. No way to blow-up the electricity bill at QRPPPP ;-)

There is an spurious signal very clear on my MF Grabber centered on WSPR sub-band
It is just 400Hz down from the main signal but you can check the signal timing
https://www.dropbox.com/s/e3f1fuv1z7yxw2n/EA5DOM_MF_SLab_Grabber.jpg?dl=0

Every frame starts at 00-15-30 and 45 minute. There is time to GPS recalibrate the U3
which is a good feature to keep QRG. Not really a standard reference but quite good
and much better than a free running oscillator

Thank you for the link to the vertical loop André. Very interesting but hard to install
here. As Graham and others suggested, will try a top feed slopper against the building
But will be a winter project. Now it's time to attend the other end of spectrum: mW and nanoW

73 de Luis
EA5DOM

-----Mensaje original-----
De: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] En nombre de DK7FC
Enviado el: miércoles, 13 de mayo de 2015 0:21
Para: rsgb_lf_group@blacksheep.org
Asunto: Re: LF: Tx test QRSS-30 476.180

Hi Luis,

Good luck for your test! It is interesting!
Maybe it is not the best time in the year :-) Very strong QRN today due to local thunderstorms. Anyway my grabbers are running 24/7.
My frequency accuracy on MF is not so high, maybe +- 2 Hz. It is not locked to a reference signal and has xtal stability. I just did a 'calibration' by setting BIA to 474 kHz (eye accuracy)...
If your signal is accurate and appers on my grabber, i will calibrate my RX to your signal :-)

73, Stefan

Am 12.05.2015 16:27, schrieb VIGILANT Luis Fernández:
> Hi MF
>
> After few days in WSPR-2 and Opera8 only EA1FAQ at 500Km and EB3FRN at
> 300Km had some frames copied. The horizontal loop is probably
> radiating with a very high angle
>
> Would like to make some QRSS tests with the same Tx conditions and see
> if I can reach central EU
>
> So will be Txing QRSS30 with DFCW at 476.179 and 476.181 from now on
>
> 73 de Luis
> EA5DOM
>
>