Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: MF fieldday DK0UR

To: [email protected]
Subject: Re: LF: MF fieldday DK0UR
From: Roland Bruestle <[email protected]>
Date: Sun, 29 Jul 2012 17:11:20 +0200
In-reply-to: <[email protected]>
References: <C5709740B95F4517AAC71B34EF1A9CC8@White> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20120604 Thunderbird/13.0
Hello Stefan,
yesterday B31, DK0UR were transmitting CW QSSR and OPERA  till 24 pm.
Equipment:
Antenna: vertical wire 15m high with 3 * 20m roof capacity.
power:
    Operator DJ2LF: CW with 30W
    Operator DL3NDR: OPERA OP4 With 80W

Today, DL3NDR ist transmitting WSPR  on 477kHz dial from Neunkirchen with his own call sign.

vy 73,
Roland DL3NDR


Am 28.07.2012 18:11, schrieb Stefan Schäfer:
Hello Markus,

Nice message. But why didn't they announce that earlier?
Have you already been in contact with them?
What antenna and power do they use?

I just arrived in Darmstadt/JN49HV and carried all the stuff for the MF dipole test with me. If the WX permits, then i will do the test tomorrow in the afternoon. So maybe, if the dipole works as i hope, i could try to come in QSO with them. It is still in the groundwave range. I will also use the dipole for receiving (have a stepped attenuator here, up to -40 dB). The TX power will be arround 30W or less.
Maybe you want to inform them for a QSO.
If all works well and no one replies in CW, i will transmit OP4 on MF, however without having internet there. So the locator may be shown wrong!


73, Stefan/DK7FC


Am 28.07.2012 17:11, schrieb Markus Vester:
The LF / MF guys from Erlangen (club station DK0UR from OV B31) are having an MF fieldday near Marloffstein, JN59MO. Roland DL3NDR is currently beaconing Op4 on 477 kHz dial (about 478.8 kHz RF). Then Walter DJ2LF intends to take over in CW 472.5 kHz around 15:30. If the wx stays favourable they will be able to operate overnight.
 
Best 73,
Markus (DF6NM)
 
 
 
 


<Prev in Thread] Current Thread [Next in Thread>