OK, tnx Wolf.
In the TRX control register card i can see a function "CW keying". What
does it make? I tried to find a changing value on the RS232 ports during
transmitting DFCW elements but found nothing...
73, Stefan
Am 04.08.2011 18:00, schrieb wolf_dl4yhf:
Hi Stefan,
You asked:
>
BTW, Wolf/YHF, is there an input for a CW key on the RS232?
<
Not directly. But there are functions to poll some signal on the
serial port, see
http://www.qsl.net/dl4yhf/speclab/interpr.htm#ptt_port_cmds
and there are commands to turn the signal generator on / off:
http://www.qsl.net/dl4yhf/speclab/sign_gen.htm#generator_cmds
You could use the 'conditional actions', which are updated every few
hundred milliseconds, to connect a serial port bit to the generator.
Not good enough for conventional CW, only for relatively slow keying.
73,
Wolf DL4YHF .
|
