Hi Gary,
Just set the "audio" center frequency if the RX tuning steps are too
far. Referring to Stewart's documentation, you can also set the 'search
range' manually :
> Depending on frequency accuracy, you may need to use the 't' option,
e.g. -t 2.5 tells WOLF
> to search +/- 2.5 Hz for the signal. Values from 0.01 to 10.0 are
reasonable; the default is 1.0 Hz.
> Larger values result in reduced sensitivity, and also require more
memory.
There should be no difference between the console- and the GUI
implementation. In fact, the GUI variant produces an internal command
line when invoking the WOLF core algorithm.
In the next GUI version, there will be a frequency near the waterfall
display indicating the carrier frequency.
Best regards,
Wolf(gang) DL4YHF .
Gary - G4WGT schrieb:
Hi Wolf & LF,
What is the frequency accuracy required for the WOLF decoder, my JRC NRD-345
will only do 5Hz steps.
Regards,
Gary - G4WGT - IO83qp
Web : http://myweb.tiscali.co.uk/wgtaylor
|
