If anyone wants to use one of these slots I will stop the QRSS transmission
73, Rik ON7YD
Quoting Gary - G4WGT <[email protected]>:
Andy,
No one will be able to use red-2, green-2 or blue-2 as Rik OR7T is sending
his call sign QRS starting in blue-1 for 7.5 minutes a little low on
503.686KHz.
I believe he only needs a short CW signal within the blue minute.
Gary - G4WGT.
_____
From: [email protected]
[mailto:[email protected]] On Behalf Of Andy Talbot
Sent: 01 April 2009 20:57
To: [email protected]
Subject: Re: LF: QRSS / beacon test on 503.7kHz
By installing a second copy of GB3RAL in another directory (folder) it is
possible to run both instances at once from the same soundcard. Offsetting
the timing differently on each allows six time slots to be monitored.
Who will bid for red-2, green-2 and blue-2? The first to do so can dictate
their preferred timeslot.
Andy G4JNT
www.g4jnt.com
2009/4/1 Rik Strobbe <[email protected]>
Dear all,
I just started a QRSS10 beacon on 503.7kHz (right now 503.705 but it might
drift down some Hz over the next hours).
The beacon will start every 15 minutes at +6 minutes (so xx:06, xx:21, xx:36
and xx:51) and the message takes about 7,5 minutes.
From +6:25 to +6:30 it will be "key down" for the "blue trace" on the G4GWT
beacon monitor.
ERP is about 200mW
73, Rik ON7YD - OR7T
Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
|
