Not a beep ...
Set power to 200 mW as of 22-05
G ..
--------------------------------------------------
From: "John P-G" <gm4slv@sighthound.demon.co.uk>
Sent: Sunday, November 15, 2009 8:44 PM
To: <rsgb_lf_group@blacksheep.org>
Subject: Re: LF: Running mW wspr
G
10dB might be a bit too much, your previous decodes were around
-25/-28dB here. Perhaps at some peaks of QSB, later in the night we
might still strike lucky.
Am considering knocking up a transverter for 500kHz and replacing the MF
ATU out at the feedpoint (currently have an HF auto-atu there) to allow
me to radiate some signals on 500 again.
Cheers,
John
Graham wrote:
2334 45 mW drive to the antenna .. slight problem zeroing the
meter as there is 60 uW of energy coming back in from the atu ....
so thats about -10 dB down on the previous level
G ..
--------------------------------------------------
From: "John P-G" <gm4slv@sighthound.demon.co.uk>
Sent: Sunday, November 15, 2009 7:18 PM
To: <rsgb_lf_group@blacksheep.org>
Subject: Re: LF: Running mW wspr
Graham wrote:
Crazy system ..... spot just in from John !
I thought your mW signal was meant to be a challenge, but of course
Roger's already discovered that WSPR will decode signals that you
can't hear, and are often so weak on a waterfall that QRSS3 would be a
struggle (despite what someone here repeatedly fails to comprehend)
Can you go any lower?
John
GM4SLV
|
