Could TC4428 be keyed in G3YXM design? If so, it would simplify the whole
schematic.
Petr, 'FIG
----- Original Message -----
From: Talbot Andrew <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 13, 2001 9:43 AM
Subject: RE: LF: RE: 73kHz tests tonight
One option would be to use the TC4428 driver chip. This has one inverting
and one non inverting driver. Drive both inputs in parallel and connect
the FET driver transformer primary, now with twice as many turns, between
both outputs. That way you can double the drive capability without
running
into the problems with the unequal switching times that can give trouble
when trying to parallel up two devices with totem pole outputs
Andy G4JNT
> -----Original Message-----
> From: James Moritz [mailto:[email protected]]
> Only real problem so far was getting the gate driver to work - even
> with both sections of a TC4427 driver IC in parallel, the drive
> waveform had rather slow edges when feeding the 4 large-
> geometry FETs in parallel,
>
--
The Information contained in this E-Mail and any subsequent correspondence
is private and is intended solely for the intended recipient(s).
For those other than the recipient any disclosure, copying, distribution,
or any action taken or omitted to be taken in reliance on such information
is
prohibited and may be unlawful.
| 