Find large lumps of core material and insert in the chokes??
Bryan
----- Original Message -----
From: "Walter Staubach" <[email protected]>
To: <[email protected]>
Sent: 19 January 2004 18:07
Subject: LF: Re: RE: Re: AC feeder...
And what about tuning the MW-choke with parallel-C to 136KHz?
Walter
-----Ursprüngliche Nachricht-----
Von: Gasparik Richard <[email protected]>
An: '[email protected]' <[email protected]>
Datum: Montag, 19. Januar 2004 18:02
Betreff: LF: RE: Re: AC feeder...
Yes, this is idea. But there are lights and they can't be switched off
(there are not fuses, fuser are 500m away on the TX site...hi).
Rich
-----Original Message-----
From: Alan Melia [mailto:[email protected]]
Sent: Monday, January 19, 2004 5:01 PM
To: [email protected]
Subject: LF: Re: AC feeder...
Hi Rich, it may be right off and impossible ( I am not a BC engineer !! or
a
power engineer) But would it be possible to put a capacitor in parallel
with
the light-feed chokes to parallel tune them to nearer 136kHz and increase
their impedance to that frequency ?? Flames accepted if that is a silly
idea. !! It would need to be a high voltage rated cap of course.
Cheers de Alan G3NYK
[email protected]
----- Original Message -----
From: "Gasparik Richard" <[email protected]>
To: "Rsgb_Lf_Group (E-mail)" <[email protected]>
Sent: 19 January 2004 15:36
Subject: LF: AC feeder...
Here is the feeding of AC through the RF line...inside the feeder....very
well coupling...
Rich OM2TW
<<chokes_2.JPG>>
| 