Uwe and Alan.
I don't know how often you get mail but I will transmit at 1500 for
30minutes (if my cheapo PSU will stand it!) and then listen.
I will get as close to 137.520 as I can, my old IC735 TX tunes in 10Hz steps
and is a little off frequency, so will be within 5Hz of 520.
If this proves successful I will transmit in the evening at 2000 for
30minutes or longer if required, same frequency.
73.
Dave G3YXM.
----- Original Message -----
From: "jannsen" <[email protected]>
To: <[email protected]>
Sent: Tuesday, January 15, 2002 12:41 PM
Subject: Re: LF: Re: Re: Introducing Jason - and asking for cooperation
Dave Pick schrieb:
> Thanks Alberto.
>
> I tried the 850MHz P3 laptop and it works fine. Obviously the 200MHz
machine
> is not good enough, I will have to upgrade the shack computer :-(
> I made a very weak signal and listened to it on a live receiver so it
was
> against real band noise. A problem seems to be that there will always be
a
> Loran line in the window so the system has trouble decoding if the
wanted
> signal is weaker than the Loran line. We'll have to see how this works
in
> practice.
> Thanks for the tip about the receive window, very useful!
> My shack PC is in 800x600 with no problems .
> I have made a few test transmissions at low power, so if anyone wants to
try
> it let me know and I'll send a beacon signal on 137.5.
> Or even a QSO?
>
> 73.
> Dave
> G3YXM.
Hi Dave and Alberto,
1. Alberto tks for the IFK software support.the screen presentation:
marvelous!
2. 800x600 is ok here.
3. Dave, I`m QRV from now until 1700UTC and from abt 2000UTC until ....
137.5kHz is good, but 137.52kHz would be better bec there are eight
strong
LORAN-C lines on .500 +/- 17Hz. on .520 +/- 17Hz only two strong
lines.
pse do announce the time u will transmitt.
regards
Uwe/dj8wx jo43sv
| 