I'll run my WSPR beacon again tonight on 503.870kHz (USB Dial 502.4kHz, tone 1470Hz) unless there are any big Eu / US stations going to be operational elsewhere in the band. Andy G4JNT www.g4jnt.com
Dear LF Group, I intend to run the WSPR beacon again on 502.4kHz "dial frequency", 503.9kHz+/- RF out, from about 2100utc this evening. Any reports will be very welcome. Cheers, Jim Moritz 73 de M0BM
Dear LF Group, I am running a WSPR mode beacon again on 502.4kHz "dial frequency", 503.905kHz RF out. Any reports would be very welcome. Cheers, Jim Moritz 73 de M0BMU
I rx your signal, Jim! http://rw3adb.narod.ru/2009/7sep2009_503.5kHz/MBU.jpg Dial freq is incorrect, but the prog is decoded. Roman The M0BMU WSPR beacon is running again - I have jacked up the anten
* James Moritz <[email protected]> [Sun, 6 Sep 2009 21:05:12 +0100]: Dear LF Group, Hi Jim & LF! Start my grabber on 503.5 dial freq. http://qrss.nm.ru/grabber.html But do not any traces n
G Try running the real NTP server rather than Dimension 4? http://www.meinberg.de/english/sw/ntp.htm Runs as an XP service and it's "the real thing" rather than a clock tweaker like Dimension 4 J Gra
Nice signal Jim, Just found AGV had removed dimension 4 from my pc .luckily not the one that runs the tx .. something on the web site about a glitch in agv fine hihi G .. Dear LF Group, The M0BMU WSP
Thanks John I will have a look at that .... G .. G Try running the real NTP server rather than Dimension 4? http://www.meinberg.de/english/sw/ntp.htm Runs as an XP service and it's "the real thing" r
Dear LF Group, The M0BMU WSPR beacon is running again tonight 0n 503.975kHz (502.4k "dial frequency"). Any reports are very welcome. Also a very strong signal from SM6BHZ tonight. Cheers, Jim Moritz
Hi Jim & LF! Started WSPR and RX'd SM6BHZ here: http://rw3adb.narod.ru/2009/7sep2009_503.5kHz/1.jpg 503.950 is a SM6BHZ WSPR signal "loud" now. It was possible to rx your station little bit b4, when
Dear Roman, Thanks for the grabber - I can see my signal on it at 0:17:56 Cheers, Jim moritz 73 de M0BMU * James Moritz <[email protected]> [Sun, 6 Sep 2009 21:05:12 +0100]: Dear LF Group,
Dear LF Group, The M0BMU WSPR beacon is running again - I have jacked up the antenna to increase the ERP a bit. G4WGT and G7NKS are also active - any reports would be very welcome. Cheers, Jim Moritz
Hi Andy - I got one decode this morning here in Watford (-15 dB at 1042) but I did not realise it was you (G8IMR) Brian (G3YKB) -- On Sun, 19/9/10, Andy Talbot <[email protected]> wrote: From
Sinece theere were no reports of my QRP WSPR beacon last night two conclusions can be drawn : a) No One was listening b) Its too weak. To resolve a) ...... ?? Not a lot I can do apart from
I'll leave my LF WSPR RX set up until tonight should anyone wish to try for reports. 73 Chris G3XIZ IO 92 UB From: brian hodgson <[email protected]> To: [email protected] Sent: Sun, 19 Sep