Hi Gerhard, compared to the capacitive fields of the antenna at VLF, the building will anyway be nearly a short circuit to ground. Connecting the lightning protector will divert some of the current w
Gary, if you'd place your carrier within +-70 mHz of 8970.0, you might have a chance to appear on Stefan's 0.42 mHz "6000" grabber. Good luck, Markus From: mailto:[email protected] STRG + Klicke
Hello Gerhard, VLF! I noticed, that you had started transmissin at 11:00UT ( S/N = 15dB). I saw Ossi´s transmission from 09:30 to 11:00UT, but very weakly, as usual Lubos, oK2BVG ** > From: gerhard.h
Hi Daniele, LF, I am planning to carry out tests on 8.968kHz from about 1200utc. Starting with continuous carrier for 1 hour or longer & then a short message at QRSS600 which will be repeated if time
Am 23.01.2011 14:06, schrieb Stefan Schäfer: Wow, Gary, The next VLF TX station it seems! Paul Nicholson is just some 30km distanced from you. I assume he is already involved in the tests? Yes..
Hi All. Please, could you tell me in which mode are you trasmitting or are you planning to transmit ? Regards and 73 Ugo/swl1281ve Il 23/01/2011 10:07, Gerhard Hickl ha scritto: Hello Daniele, group!
Currently my SpecLab window covers from 8969.95 to 8970.05 (so 8970Hz +- 50mHz) with 141uHz FFT and 10 minutes waterfall scroll interval. Initially I started with 3mHz FFT and 60 seconds per scroll (
Markus The metal vapour barrier might cause Condensation in the roof, like a tin roof on a house or shed Do you get drips from the metal de mal/g3kev -- Original Message -- From: [email protected]
Ossi, Gerhard, VLF, Ossis signal is very remarkable, even without the balloon it's up to 20 dB above noise in 424 uHz. So if its 10 dB stronger with the balloon, copy of QRSS/DFCW-600 would be no pro
Hi Markus! Thank you for your answer the explaination. I switched down for 3mHz intentionally to be more apart from Ossi's signal at 8970.03 and to compensate a little upward drifting....it's getting
Ossi has started transmitting on 8970.029 at 8 UT. He said that he hadn't put up the balloon yesterday, but has gained 5 dB by improving his loading coil. There is also a weak continuous line at 8970
Hello again! At about 12:30UT I disconnected the lightning protector again. At 500mA Antenna current the wires from the roof are at about 200V and the current to earth was measured at 60mA. I did thi
Gary, if you'd place your carrier within +-70 mHz of 8970.0, you might have a chance to appear on Stefan's 0.42 mHz "6000" grabber. Good luck, Markus From: Gary - G4WGT Sent: Sunday, January 23, 2011
Wow, Gary, The next VLF TX station it seems! Paul Nicholson is just some 30km distanced from you. I assume he is already involved in the tests? :-) What is your TX equipment, some data please :-) 73
Hello Lubos and group! Yes, I started at about 11UT. Yesterday at 12:45UT I reconnected the lightning protector of the house to ground but I couldn't see any difference on the plot you sent. So I gue
Hi Gerhard, Am 23.01.2011 18:18, schrieb Gerhard Hickel: Propagation seem to be better now than most of the day (at least to Stefan in 590km). My signal peek up shortly before QRT. You have been a go
Mal, group! Unfortunately I just had to stop my TX because it started snowing and the coil gets wet. Propagation seem to be better now than most of the day (at least to Stefan in 590km). My signal pe
