Hi Dave, Jim, It's the spongey rubber-VCXO used in the IF shift/ passband tuning that's by far and away the worst drifty thing in the '735. More trouble than it's worth to try and fix, and which then
Hi Dave I have a mk2G and once you’ve done the diode tx mod it goes to tx mode 0 to 30mhz, however RF out is minimal much below 250khz, as you get above 400khz it rapidly spools up to 25w or so
On 27 Oct 2010, at 15:19CEST, L.v.Erck wrote: These days I 'm using the good old T-1154 on 502 kHz, but is drifting down below the 501 kHz (Our limit in the Netherlands). And an R1155? 73 John F5VLF
Hallo Kevin. Did you get any response on your request concerning the IC-718 sending below 1.6 MHz? I also do have one and I also do like to get the 718 working on 500 kHz. These days I 'm using the g
Dear All, Find an old Ic735 or better still a 706mk2g and open it up. Rx is a bit dull but a datong vlf adaptor will do the trick too and you have a capable 137/500 transcieve kit Jim G7NKS/GI7NKS F
Anyone know mods to enable the TX of the IC7000 below 1500 KHz? Fausto IK4NMF -- Original Message -- From: [email protected] James Cowburn To: [email protected] rsgb_lf_group@blacks
Dear All, Find an old Ic735 or better still a 706mk2g and open it up. Rx is a bit dull but a datong vlf adaptor will do the trick too and you have a capable 137/500 transcieve kit Jim G7NKS/GI7NKS Fr
At last! A possible use for the (usually) removed DF circuitry John? (And you'll need the correct suffix letter !) 73 -- 73 es gd dx de pat g4gvw qth nr felixstowe uk (east coast, county of suffolk)