Hi Chris/Stefan Loosely connected to your question, I wanted to switch my Inv L between LF/MF Variometer/loading coils and HF Auto remote tuner remotely, i.e 120' away from the shack. Every relay I t
I'd be interested to see a picture / diagram of your switch I once foolishly tried a 10kV rated reed relay thinking 10kV rated contacts would surely do the job - it lasted probably a couple of cycle
Hello Ian, You have me worried now, as does Andy with his last post, the thought of putting a kilowatt into the RX antenna socket of my 590 is not a pleasant or cheap one... Hmmm. -- Best regards, Ch
Chiming in, Fail Safe? Then you are going to want to interlock the Amplifier to avoid a state failure. The Relay has to be part of the loop, interlock so should its position fail you dont assume the
Digressing slightly, but a parallel warning... I once hot disconnected a BNC plug carrying 700 Watts of RF (Low Z, transmitter output) . As the contact broke it generated a plasma arc that shot
Hi Chris Well I guess my remarks do have a bearing on your question. Sorry to put the mockers on the idea, but you could test the switch before connecting the RX to it, that may at least ensure the s
Hello Ian, I would like to see the details yes please Ian. I want to do something similar to enable my strapped feeder for LF to revert to none strapped feeder for HF, returning the horizontal quad l
Ok Chris Will send you some info shortly, domestic duties call!! University Challenge tonight too, i.e XYL/OM Challenge hi. No that's not me, programming knowledge 2%! 73 Ian G4GIR --Original Message