Nothing here Henny ! Noise did increase here last few day's. (see my 47 uHz screendump) 73's PA1SDB www.qsl.net/pa1sdb -- Original Message -- From: [email protected] henny To: [email protected]
Henny, It looks like there is evidence of a stable signal at 8270 Hertz in my grabber to! www.qsl.net/pa1sdb 73's, Peter - PA1SDB -- Original Message -- From: [email protected] henny To: rsgb_lf_group@bl
Hi Peter, Henny, DHO on 23.4 KHz when you'r transmitting on 8270 Hz ? Yes, this is not difficult, see pics at df6nm.bplaced.net/VLF/MSK_sync_during_transmit/ I used a small resonant ferrite loopstick
Hello Henny, VLF. I think signal was stronger this time. Time of the day was better. That trace at 8270.100 in my grabber is a localy generated carrier with Spectrum lab and 1 meter wire as antenna :
Hello Henny, My 20 uHz screen is saturated by lightning QRM, but I think I see you clear in my 238 uHz screen. At the Todmorden site is also a trace visible (with breaks) on 8270.000 Hz Seems to work
Hello Henny, Yesterday I did change my 47 uHz window into 21uHz. So, it needs some time (99 minutes) to scroll a pixel ! Hopefuly you are able to stay on the air for a few pixels :-) 73's, Peter - PA
Not me ! Unfortunately :( Still windong coils 73 de Luis EA5DOM ________________________________________ De: [email protected] [[email protected]] en nombre de DK7FC
Hello Luis, How does your bucket look now? Photo? 0.2 mm diameter is hard to wind. You need to be patient with yourselfe. But after some hours you will notice that your skills become better with each
Hi Stefan, VLF The "Tricotosa" works nicely. Added a pedal to activate the motor, which is very useful I think I used too much double side tape and need to get the kapton to be able to continue You a
Hi Henny Vy clear visible signal here in the City of Appingedam today. For some unknown reason the noise did drop and your signal became bright and shiny visible in the spectogram. The antenne is clo
Hi Henny, Can you tell me if it is shown on the correct frequency (8270) ? I stare at the display & I think I see a signal & then I don't. Porblem !! ........I am testing various active antenna confi