If timing slips, the averaged power will be out by the amount of slippage. So, for a 1 second error the total power summed over the window is 4/5, or about 1dB down. For 2.5s slippage, -3dB BUT.
Yes. All it does is measure the total signal within the 25 - 30 second. You could transmit for the entire one minute and it would still give the same reading. But avoid the preceding minute t
No it uses the average power over the 5 second period. You could always start it 1s early and stop 1s later Andy G4JNT www.g4jnt.com 2009/3/18 Graham <[email protected]> Andy, Q .. If the
Andy, Q .. If the tx is keyed by vox/breakin will the slight clipping of the leading edge of the beacon cause time problems ?? reason being .. if use force 'tx' will miss the beacon rx windows ?? Tnx
Hello Andy, if I got it right the RX software will make a correct measurent as long as the signal is there during the 5 second period, even if the transmission start a few seconds early and stops a f