Sync = 21 That's more like it ! Andy www.g4jnt.com 2010/1/22 Gary - G4WGT <[email protected]> Jim, LF, Is it a 1st for UK 500 kHz WSJT JT4A 2 way contact ?? Thanks Jim, looks like my change of so
Jim, LF, Is it a 1st for UK 500 kHz WSJT JT4A 2 way contact ?? Thanks Jim, looks like my change of sound card did the trick. Thanks for the 2 way. 73, Gary - G4WGT. 202100 20 -4 -0.1 -24 29 *
Sync = 9 dB = -2 DT = 0.0 DF = -107 W = 33 73, Rik ON7YD - OR7T Quoting Rik Strobbe <[email protected]>: Hello Gary, Jim, I just fired up WSJT7 in JT4A mode. I can see a very fat trace at
LF, I will be beaconing WSJT JT4A again this evening & I would welcome any decodes, I have made changes in view of not decoding a reply last night. I just need to confirm my outgoing signal before ch
Andy, thanks. I just decoded Gary : "CQ G4WGT IO83", sync = 11 , dB = -2. Not sure wether QRM is an issue, I see 2 bright traces against a black background. What else could cause the poor sync ? 73,
Dear Gary, LF Group, Is it a 1st for UK 500 kHz WSJT JT4A 2 way contact ?? Well, I'm not sure - one kind of loses track after a while ;-) Thanks for the QSO, Gary. JT4A actually seems to work quite w
As said I haven't read any instructions / manual but maybe the figures WSJT7 spits out on the readable copies of Jim may give a clue: Sync = 9 dB = -2 DT = 0.0 DF = -107 W = 33 73, Rik ON7YD - OR7T H
That sync figure not 'poor'. The mode will decode with values as low as 3 or 4. Just not as good as it could be in pure noise at that S/N. Pulse type QRM interferes with the decoding process mor
See annotations below Andy www.g4jnt.com 2010/1/22 Rik Strobbe <[email protected]> As said I haven't read any instructions / manual but maybe the figures WSJT7 spits out on the readable c
Gary, Jim, thank you both for the JT4A test. Gary, I got no further than a single decode, all others went to Jim ;-) I must indeed read the manual (although reading a manual can be seen as a sign of
Hello Gary, Jim, I just fired up WSJT7 in JT4A mode. I can see a very fat trace at 503.460 that decodes as "TEST M0BMU" and a little less fat trace at 503.600 that is probably Gary. But even if I set
Gary, OK, I just decoded you (see previous mail). But signals are that strong that CW would be armchair copy. I guess I have to figure out the sync problem (as I understand a good value would be 20 o
Gary, OK, I just decoded you (see previous mail). But signals are that strong that CW would be armchair copy. I guess I have to figure out the sync problem (as I understand a good value would be 20 o
Rik, Thanks for the report & pleased you are getting decodes now. If you click the mouse on the "Tol" setting box. left click down, right click up, take it down & click freeze, that will freeze the d
