Hello James and the group! Thanks for the reply. Unfortunately I can't copy your signal in the moment, let's hope for the evening/night. I'm using my shortwave-antenna, a 55m long endfed wire in abou
Hello Group! @James: Thanks a lot. Built a L-filter and the sensitivity is now at least 10db (maybe even more) better. -60dbm (instead of -50dbm) fed into the same wire than before can now be seen cl
Hi James, Hello group! Thanks a lot for your efforts, but still no copy here. I watched out for the beacon until now but I have a lot of QRN/M. Something is basically wrong with my RX-design and I ha
Dear Lubos! At which time are you usually transmitting? (QRG?) I'm just a beginner in LF and it would be interesting if I can copy you here in JN88HL. Greetings OE3GHB Gerhard Am Donnerstag, den 25.0
Hello all! I have set up a selectivel level meter (HP) as a LOFER-rx. I can see the modulation of DCF39 very well but I never receiced any other signal. So I would need a station close to me (JN88HL)
Hello group! Just saw F8BOJ 20db over noise in JN88hl. I can't get back to him because I haven't got at TX yet. I completed my antenna yesterday. I is about 80m of wire in avg. 10m above ground (600p
Hello Group! I haven't followed the list very closely recently and so I might have missed something. Could anybody please tell me what kind of signal is permanently on 137140? (Always visible on the
Hello group! Just received a CQ from DJ9GT on 137700 with 15-20db over noise in JN88HL. I couldn't find a personal mail-address, so hopefully he's member of the list. I'm a LF-beginner and this is ac
Servus Markus! Thank you very much for the information. The signal is not audible here, at least not with my equipment but maybe if I switch to a short update time I could decode it visually. Schöne
Hi all! In the moment I'm trying to test my TX and my antenna. I'm going to transmit from 1800z to 2000z today. Probably a bit longer. My Antenna is a Marconi, 12m vertically/top-loaded. The loading
Mal! Thank you very much for your report. I'm glad to heard that I made it over to you. I'm a LF beginner and let me use this opportunity to thank Ossi, OE5ODL. He helped a lot with tips and hints re
Hello Uwe! You're right.....but if you don't open the window once a while it becomes very sticky inside...right? cheers from Austria es AWDH OE§GHB Am Freitag, den 11.12.2009, 14:29 +0000 schrieb Uwe
Servus Marco! Thank you for you report. My TX makes about 35W of antenna-input and I modified the RX/TX switching today. The purpose of this test was to find out if there are any "clicks" or some oth
Hello group! I'm going to transmit a beacon for several hours this night. Text is "H" on 136.318, speed is QRSS90. Ossi, OE5ODL is transmitting his "5" a few cps above. We both use roughly 50W antenn
Dear Piotr! Thank you for the report. Ossi is transmitting at 136.321. I think conditions will improve during the next hours and you will be able to copy more. My beacon will run for the next 2 or 3
Mike! Thanks for the schematic. I will try to build a similar thing with the parts I have in my junk box. Thanks you and Cheers OE3GHB Gerhard Am Montag, den 21.12.2009, 10:14 +0000 schrieb Mike Denn
Hello folks! As some of you may have noticed, I became active on LF. My TX makes about 50W at 13,8V and the Antenna is a Marconi with multiple topload wires. Basically it consists of two 12m Fiber po
Hello folks! I was one of the "bad boys" transmitting yesterday night in the "waterhole"...The purpose were some test with the antenna where I rely on grabbers. But of course, I didn't choose my qrg
Sorry but I couldn't manage to include a better picture into my previous mail. There seems to be a limit upon 30kB or something. Here's a link to a better picture: http://www.hickl.at/oe3ghb/OE3GHB%2
Hello Mal! Tnx for your report! I just was about running some test overnight when I blew the buffer-stage of my VFO. So maybe I will be able to transmit again tomorrow. I'm trying to improve my stati
