Hi all, I'll be there also. Just must spend some time in SARA stand. See you in Friedrichshafen. 73 de Rich OM2TW --Original Message-- From: [email protected] [mailto:[email protected]] Sent: Monday, June
Hi all LF-ers... During the year 2004 (1.1.-31.12.2004) will be QRV special event station OM100TS (100=100 years TS=Tone System) on all LF, HF and VHF/UHF/SHF/MW bands, but mostly on LF with mode DFC
Hi Sam, I just leave the office. So, in about 1 hour I'll be home. So I can be QRV from 1830 GMT. It's OK? Rich OM2TW Hello ! Today (04/dec/2003) test my equipments. 137.7 17 - 19 GMT -- Best regards
Hi lfers... After a long time (since march) I'm again QRV on 136kHz. I have had a busy year in my business. I have worked S52AB (CW and QRSS), I5TGC and some HA's (10 HA statiopns!!!) from the 314m h
Hi Dick, L3/L4 is a step up transformer. Normaly the TDA 2030 have 4-8 Ohm output impedance. You must look for an toroid with very high permeability (2000 and more) and make an L3:L4 = 1:3 transforme
Yes, this is idea. But there are lights and they can't be switched off (there are not fuses, fuser are 500m away on the TX site...hi). Rich Hi Rich, it may be right off and impossible ( I am not a BC
Hi Rik and others... After I discuss this problems with Bob OK2BVG and we found the problem. The tower itsefs is DC isolated, but...on the tower are 4 lihgts (2x in 70m and 2x in 135m) powered by 410
Hi LF-ers... Here is a small story from our expedition. At 1400 local time we were on site. WX was good and we start tuning the antenna. Receiving problems has been solved very quickly and we heard D
DX4WIN, WriteLog, CT by K1EA and other programs using following interface: Pin numbers from the LPT DB25 male connector: Pin1 = CW keying (Strobe signal) Pin16 = PTT (Init signal) 73 de Rich OM2TW He
Sofar I haven't seen any reports of interference caused by 136kHz stations to consumers electronic devices. Wonder how serious is the possibility of interfering in audio-equipement in the neighbourh
Good idea. I have 2 interfaces build (for CW and also for QRSS) and switched by LPT switch. For CW I'm using internal keyer from logging program DX4WIN and QRSS with QRS (ON7YD). Problem is that both
Hi LF-ers... 1400-2130Z - TRX CW mostly, some QRSS/DFCW3 (still no skeds) 2130-2200Z - TX CQ in DFCW20 on 135.923 (dot 135.922.75) for VO1NA, CT1DRP, etc 2200-2230Z - RX QRSS20 on 137.777 for VO1NA,
Hi Eric, I'll operate from near BC station which is about 6 months QRT and it will be destroyed this year. This is the last chance to be QRV from that site. I'll send you some pictures of course. 73
Hi LF-ers... I'll be QRV from 135m high vertical this weekend with the call OM2TW, OM5KM and maybe OM100TS. Mostly on CW, but also some QRSS acty. I'll try also T/A during the night time, maybe also
Oh my god, this is not a far away from me. The days on LF are over....sad. Rich OM2TW The following from Geri... Hello Alan, I just had your e-mail address on hand, so I am sending this to you, maybe
Hello LF group... It's true, 100kW near Budapest make a strange QRM in lower part of 136kc. I'm about 100km from Budapest and is unpossible to do anything in CW band. On 137.7 is OK. Time to go QRT?
