Message-ID: <50D2646B.1000601@iup.uni-heidelberg.de>
Date: Thu, 20 Dec 2012 02:05:47 +0100
From: =?ISO-8859-15?Q?Stefan_Sch=E4fer?= <Stefan.Schaefer@iup.uni-heidelberg.de>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
MIME-Version: 1.0
To: rsgb_lf_group@blacksheep.org
References: <50D247F5.3080503@iup.uni-heidelberg.de> <F0C631B198704C8CAF73059D2AF1A2C0@AGB> <50D2534D.3040609@iup.uni-heidelberg.de> <Pine.LNX.4.64.1212192039340.12775@plato.ucs.mun.ca> <7E34FA1EB5614B7AB22037066FCD1308@AGB> <Pine.LNX.4.64.1212192126360.14068@plato.ucs.mun.ca>
In-Reply-To: <Pine.LNX.4.64.1212192126360.14068@plato.ucs.mun.ca>
Subject: Re: LF: Beacon to the west
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: quoted-printable
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


These lines must fit exactly in the 2 minute slot showing in the=20
spectrogram. They appear at "460" which means 136.000 +1460 Hz. They are=20
no sharp lines, rather broad.

Do they? Can you send me a screenshot?

73, Stefan

Am 20.12.2012 01:59, schrieb jcraig@mun.ca:
> Nothing on the OP32 screen as yet, Graham.  Am seeing some short green
> lines on  the WSPR screen (could be DK7FC?) but no decodes.
>
> On Thu, 20 Dec 2012, Graham wrote:
>
>> Joe,
>>
>> Depends on the  PC , but you  can  run  X 2  Opera  , set one to =20
>> Op32  and the  other  OP8   and you  can  monitor  the   two  speeds =20
>> , switch the w/fall  off  if  cpu load is  too  high
>>
>> No decodes  yet then ?
>>
>> 73 -G..
>>
>> --------------------------------------------------
>> From: <jcraig@mun.ca>
>> Sent: Thursday, December 20, 2012 12:13 AM
>> To: <rsgb_lf_group@blacksheep.org>
>> Subject: Re: LF: Beacon to the west
>>
>>> Hi G.. and Stefan,
>>>
>>> Thanks to a helpful tip  from Joe W1JT, WSPR is now running along
>>> with OP32 (136 kHz USB).  Unfortunately there is much noise (perhaps
>>> a SMPS in a neighbours house) and nothing has been decoded so far=20
>>> tonight.
>>>
>>> 73
>>> Joe VO1NA
>>>
>>> On Thu, 20 Dec 2012, Stefan Sch=E4fer wrote:
>>>
>>>> I would give it a try io OP8.
>>>>
>>>> Joe/VO1NA, are you reading this? Do we want to give it a try?
>>>>
>>>> 73, Stefan
>>>>
>>>>
>>>> Am 20.12.2012 00:31, schrieb Graham:
>>>>> Stef,
>>>>>
>>>>> Thought  you  would  of  tried   for  vo1na  , op32  ? condx  dont=20
>>>>> look too good , no  decodes  last  night , but  Joe  is =20
>>>>> monitoring  again now .
>>>>>
>>>>> Back to  vintage  data on 502   at the  moment , has to  be =20
>>>>> audible from the  speaker or no  print !
>>>>>
>>>>> G..
>>>>>
>>>>> --------------------------------------------------
>>>>> From: "Stefan Sch=E4fer" <Stefan.Schaefer@iup.uni-heidelberg.de>
>>>>> Sent: Wednesday, December 19, 2012 11:04 PM
>>>>> To: <rsgb_lf_group@blacksheep.org>
>>>>> Subject: LF: Beacon to the west
>>>>>
>>>>>> LF/MF!
>>>>>>
>>>>>> In the moment i'm running a QRSS-60 beacon on 136.172 kHz. A few=20
>>>>>> turns. If someone is interested...
>>>>>>
>>>>>> During that time i will add a variometer part to the MF loading=20
>>>>>> coil. The antenna Q requires an adjustable inductance for=20
>>>>>> optimised operation, which is a bit annoying. Never mind...
>>>>>> This is to prepare QRSS-10 beacon transmissions in the uppar part=20
>>>>>> of the band.
>>>>>>
>>>>>> Wonderful hobby.
>>>>>> BTW tnx for the RTTY thread, which is interesting. There is a=20
>>>>>> good entertainment on this refelctor at all (these days, again).=20
>>>>>> Never tried RTTY in my live. But maybe soon :-)
>>>>>>
>>>>>> 73, Stefan/DK7FC
>>>>>>
>>>>
>>>>
>>> This electronic communication is governed by the terms and=20
>>> conditions at
>>> http://www.mun.ca/cc/policies/electronic_communications_disclaimer_20=
12.php=20
>>>
>>>
>>
> This electronic communication is governed by the terms and conditions a=
t
> http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012=
.php=20
>
>