Return-Path: Received: from post.thorcom.com (post.thorcom.com [195.171.43.25]) by mtain-db05.r1000.mx.aol.com (Internet Inbound) with ESMTP id E8961380000A0; Sat, 22 Sep 2012 07:28:27 -0400 (EDT) Received: from majordom by post.thorcom.com with local (Exim 4.14) id 1TFNsD-0000Tc-SL for rs_out_1@blacksheep.org; Sat, 22 Sep 2012 12:27:49 +0100 Received: from [195.171.43.32] (helo=relay1.thorcom.net) by post.thorcom.com with esmtp (Exim 4.14) id 1TFNsD-0000TS-AC for rsgb_lf_group@blacksheep.org; Sat, 22 Sep 2012 12:27:49 +0100 Received: from imr-db01.mx.aol.com ([205.188.91.95]) by relay1.thorcom.net with esmtp (Exim 4.77) (envelope-from ) id 1TFNs7-0006Nl-Hx for rsgb_lf_group@blacksheep.org; Sat, 22 Sep 2012 12:27:48 +0100 Received: from mtaout-mb01.r1000.mx.aol.com (mtaout-mb01.r1000.mx.aol.com [172.29.41.65]) by imr-db01.mx.aol.com (Outbound Mail Relay) with ESMTP id DFFEF38000089; Sat, 22 Sep 2012 07:27:41 -0400 (EDT) Received: from White (nrbg-4d072de3.pool.mediaWays.net [77.7.45.227]) by mtaout-mb01.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPA id 933CEE0000B9; Sat, 22 Sep 2012 07:27:38 -0400 (EDT) Message-ID: From: "Markus Vester" To: Cc: References: <41E179E8BC3D497AB344D966959A61C6@White> <505D0DB5.4080108@iup.uni-heidelberg.de> <386BA5055A494FEC9164314A593DCB8D@White> <000901cd98a8$7cd20a00$76761e00$@com> Date: Sat, 22 Sep 2012 13:27:36 +0200 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal Importance: Normal X-Mailer: Microsoft Windows Live Mail 12.0.1606 X-MimeOLE: Produced By Microsoft MimeOLE V12.0.1606 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20110426; t=1348313261; bh=Ka835Vl8XLhOrKHL9HrJsY1kVNeBAeXGskdxclis2tQ=; h=From:To:Subject:Message-ID:Date:MIME-Version:Content-Type; b=Tl5e+sPv+iEdBgTKneFu/b/f4M8XRabVQZZoqyZD/QICGXzG519/JyEiLQmGzgHB7 KNxUadIa9PP0D3AYHyVuGwGy1gnzTDY45PRUX4VnSYARR7q5mK0e0Jq8igrYTvD8mJ 9JCLc1hdN6UYAmVcO/9l5eazP60H5fQ+3kMEyD7c= X-AOL-SCOLL-SCORE: 0:2:487209216:93952408 X-AOL-SCOLL-URL_COUNT: 0 X-Spam-Score: -0.5 (/) X-Spam-Report: Spam detection software, running on the system "relay1.thorcom.net", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or label similar future email. If you have any questions, see the administrator of that system for details. Content preview: Hi Terry, it looks like the frequencies don't match yet. SndInput fc should be the incoming audio band from the RX, and SndOutput fc should correspond to the BFO frequency in WSPR. The fc value can be edited in the little SndInput / SndOutput windows so you won't have to restart the batch script. [...] Content analysis details: (-0.5 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [205.188.91.95 listed in list.dnswl.org] 0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail provider (markusvester[at]aol.com) -0.0 SPF_PASS SPF: sender matches SPF record -0.5 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain 0.0 HTML_MESSAGE BODY: HTML included in message 0.0 T_DKIM_INVALID DKIM-Signature header exists but is not valid X-Scan-Signature: 539279ff7bff569d21f0b11e439ca5cc Subject: Re: LF: Experimental software for WSPR-8 and -32 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0004_01CD98C6.07F13FD0" X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on post.thorcom.com X-Spam-Level: X-Spam-Status: No, hits=0.2 required=5.0 tests=HTML_60_70,HTML_MESSAGE, MISSING_OUTLOOK_NAME autolearn=no version=2.63 X-SA-Exim-Scanned: Yes Sender: owner-rsgb_lf_group@blacksheep.org Precedence: bulk Reply-To: rsgb_lf_group@blacksheep.org X-Listname: rsgb_lf_group X-SA-Exim-Rcpt-To: rs_out_1@blacksheep.org X-SA-Exim-Scanned: No; SAEximRunCond expanded to false x-aol-global-disposition: G X-AOL-SCOLL-AUTHENTICATION: mtain-db05.r1000.mx.aol.com ; domain : mx.aol.com DKIM : pass x-aol-sid: 3039ac1d4059505da0db2f34 X-AOL-IP: 195.171.43.25 X-AOL-SPF: domain : blacksheep.org SPF : none Dies ist eine mehrteilige Nachricht im MIME-Format. ------=_NextPart_000_0004_01CD98C6.07F13FD0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi Terry, it looks like the frequencies don't match yet. SndInput fc should be the = incoming audio band from the RX, and SndOutput fc should correspond to = the BFO frequency in WSPR. The fc value can be edited in the little = SndInput / SndOutput windows so you won't have to restart the batch = script.=20 Stefan and I are currently sending WSPR-8 on 137430 / 137440 Hz in = alternate 10 minute slots. Thus with your 136 kHz LO, you could set fc = =3D 1430 in SndInput. As your WSPR is listening around 2 kHz, SndOutpt = needs to have fc =3D 2000. If you would like to show the correct = frequency for Stefan in the spots, you can set the dial entry in WSPR = (but not your RX!) to 0.13543 MHz. BTW I have uploaded a modified version today which starts the replay = immediately after the incoming signal has ended. So the spots will be = delayed by 8 instead of 10 minutes. There are also some amendmends in = the readme. Good luck, Markus (DF6NM) From: Terry GW0EZY=20 Sent: Saturday, September 22, 2012 11:56 AM To: rsgb_lf_group@blacksheep.org=20 Subject: RE: LF: Experimental software for WSPR-8 and -32 Hi Marcus =20 I can never resist the opportunity to play with new software decoders!! =20 I have tried to set up the software according to the readme file but no = success so far.=20 =20 A folder has been setup with all the files from your zip + sndutl_e.zip =20 I am using an SDR14, VAC 4.12, Win7/32, WSPR2.11 =20 The VAC is set as default Soundcard for recording and output. The SDR14 = (dial or reference frequency =3D 136 kHz) is set to use VAC for output. = WSPR is set for VAC as input. =20 I have set WSPR with BFO=3D670 Hz.=20 =20 After running wspr-08_rx.bat =20 The Sound Input panel shows fr/Hz =3D 670 (autoset); ft/Hz =3D 0 ; bu = =3D 100% vo =3D 0% =20 The Sound Output panel shows fc/Hz =3D 2000; ft/Hz =3D 0; bu =3D 0% =20 The DOS CMD panel shows some sort of loop action: copy audio.dat = audio2.dat 1 file copied; goto loop; waitraster 600 -20; del audio.dat; = waitraster -120 -5 etc etc =20 However WSPR is not seeing any signal input. =20 Where is my mistake in setting up?? =20 73 Terry =20 ------=_NextPart_000_0004_01CD98C6.07F13FD0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi Terry,
 
it looks like the frequencies = don't match yet.=20 SndInput fc should be the = incoming audio=20 band from the RX, and SndOutput fc should correspond to the BFO = frequency in=20 WSPR. The fc value can be edited in the little SndInput / SndOutput = windows so=20 you won't have to restart the batch script. 
 
Stefan and I are currently sending = WSPR-8 on 137430=20 / 137440 Hz in alternate 10 minute slots. Thus with your 136 kHz = LO, you=20 could set fc =3D 1430 in SndInput. As = your WSPR is=20 listening around 2 kHz, SndOutpt needs to have fc =3D = 2000. If you=20 would like to show the correct frequency for Stefan in the spots, you = can set=20 the dial entry in WSPR (but not your RX!) to 0.13543 = MHz.
 
BTW I have uploaded a modified version = today which=20 starts the replay immediately after the incoming signal has ended. So = the spots=20 will be delayed by 8 instead of 10 minutes. There are also some = amendmends in=20 the readme.
 
Good luck,
Markus (DF6NM)
 

Sent: Saturday, September 22, 2012 11:56 AM
Subject: RE: LF: Experimental software for WSPR-8 and=20 -32

Hi=20 Marcus

 

I=20 can never resist the opportunity to play with new software=20 decoders!!

 

I=20 have tried to set up the software according to the readme file but no = success so=20 far.

 

A=20 folder has been setup with all the files from your zip +=20 sndutl_e.zip

 

I=20 am using an SDR14,  VAC 4.12,  Win7/32, = WSPR2.11

 

The=20 VAC is set as default Soundcard for recording and output. The SDR14 = (dial or=20 reference frequency =3D 136 kHz)  is set to use VAC for output. = WSPR is set=20 for VAC as input.

 

I=20 have set WSPR with BFO=3D670 Hz.

 

After=20 running wspr-08_rx.bat

 

The=20 Sound Input panel shows  fr/Hz =3D 670 (autoset); ft/Hz =3D 0 ; bu = =3D 100% vo =3D=20 0%

 

The=20 Sound Output panel shows fc/Hz =3D 2000;  ft/Hz =3D 0; bu =3D=20 0%

 

The=20 DOS CMD panel shows some sort of loop action: copy audio.dat audio2.dat = 1 file=20 copied; goto loop; waitraster 600 -20; del audio.dat; waitraster -120 -5 = etc=20 etc

 

However=20 WSPR is not seeing any signal input.

 

Where=20 is my mistake in setting up??

 

73=20 Terry

 

------=_NextPart_000_0004_01CD98C6.07F13FD0--