From: "Mike Dennison" <mike.dennison@ntlworld.com>
To: rsgb_lf_group@blacksheep.org
Date: Sat, 26 Feb 2011 10:52:00 -0000
MIME-Version: 1.0
Message-ID: <4D68DB50.1138.3D425F@mike.dennison.ntlworld.com>
In-reply-to: <AANLkTik+J9S+bDp58+Upu4Uc5GyfYnph+DcrfQO-sRbj@mail.gmail.com>
References: <4D68D656.11240.29D4BD@mike.dennison.ntlworld.com>, <AANLkTik+J9S+bDp58+Upu4Uc5GyfYnph+DcrfQO-sRbj@mail.gmail.com>
Content-description: Mail message body
Subject: Re: LF: HE3OM in JA
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Toni,

Unfortunately, this will only be effective if you can get JA7NI to 
alter his Argo to QRSS30 as well. His current setting is '90s slow 
speed' which is about right for QRSS120. If you can't get the 
receiver setting changed, you could get away with QRSS90.

Good luck.

73 de Mike
==========

 
> Thank you Mike
> we will try again tonight and JA7NI will switch to QRSS30.
> 73 de Toni
> 
> 2011/2/26 Mike Dennison <mike.dennison@ntlworld.com>
> 
> > Last night HE3OM put a good signal into JA7NI's grabber at JA dawn..
> > UA4WPF can also be seen, but much weaker than previously. See
> > attached.
> >
> > Also attached is the same time on RN3AGC's grabber which shows that
> > DF6NM and myself were also calling, but we could not compete with
> > HE3OM's ERP which I estimate as 15-20dB up on us.
> >
> > The JA picture also supports my theory that QRS120 is not a
> > practical speed for real DX. There are long periods where the signal
> > is well above the noise, but QSB prevents the whole callsign being
> > received. At that strength, QRS30 would probably have still been
> > viable and allowed a couple of full calls to be read.
> >
> > Congratulations to HE3OM on what may be an amateur world record on
> > 136, though with an estimated ERP much bigger than most amateurs
> > have available.
> >
> > Mike, G3XDV
> > ==========
> >
> > The following section of this message contains a file attachment
> > prepared for transmission using the Internet MIME message format. If
> > you are using Pegasus Mail, or any other MIME-compliant system, you
> > should be able to save it or view it from within your mailer. If you
> > cannot, please ask your system administrator for assistance.
> >
> >   ---- File information -----------
> >     File:  DX_at_RN3AGC.jpg
> >     Date:  26 Feb 2011, 10:14
> >     Size:  16113 bytes.
> >     Type:  JPEG-image
> >
> > The following section of this message contains a file attachment
> > prepared for transmission using the Internet MIME message format. If
> > you are using Pegasus Mail, or any other MIME-compliant system, you
> > should be able to save it or view it from within your mailer. If you
> > cannot, please ask your system administrator for assistance.
> >
> >   ---- File information -----------
> >     File:  HE3OM_at_JA7NI.jpg
> >     Date:  26 Feb 2011, 10:17
> >     Size:  38621 bytes.
> >     Type:  JPEG-image
> >
> >
>