Graham:

RX1: 19:15 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -27 dB 594 km @ 300=BA=

RX1: 19:22 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -30 dB 594 km @ 300=BA=

RX1: 19:29 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -31 dB 594 km @ 300=BA=

RX1: 19:41 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -28 dB 594 km @ 300=BA=

RX1: 19:47 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -26 dB 594 km @ 300=BA=

RX1: 19:54 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -19 dB 594 km @ 300=BA=

RX1: 20:00 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -19 dB 594 km @ 300=BA=

RX1: 20:06 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -24 dB 594 km @ 300=BA=

RX1: 20:12 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -23 dB 594 km @ 300=BA=

RX1: 20:19 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -20 dB 594 km @ 300=BA=

RX1: 20:25 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -21 dB 594 km @ 300=BA=

RX1: 20:31 @ 2,1 Hz: CQ DE G0NBD IN= IO83LK <STOP> -20 dB 594 km @ 300=BA=

at -20dB the signal is just aubible bu= t still to weak for CW copy.

73, Rik ON7YD

Van: owner-rsgb_= lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org] namens Graham= [g8fzk@g8fzk.fsnet.co.uk]
Verzonden: zaterdag 28 augustus 2010 19:09
Aan: rsgb_lf_group@blacksheep.org
Onderwerp: Re: LF: ros -MF 502 K -on now-

Rik,

Looks like I need another= 3dB for 100% decode !

fb on the sound card .. may be= a change , that was the same problem with

wspr , sample rate not lo= cked .

Q have you only 2 = decodes ?

tnx - G..

From: Rik Strobbe

Sent: Saturday, August 28, 2010 5:57 PM

To: rsgb_lf_group@blacksheep.org

Subject: RE: LF: ros -MF 502 K -on now-

Graham,

just had this copy while ROS and CMS= K software were running simultanious:

RX1: 16:55 @ 2,1 Hz: CQ,,E G0NBD IN= IO83LK <STOP> -35 dB 594 km @ 300=BA=

73, Rik ON7YD - OR7T

Van: owner-rsgb_lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org= ] namens Graham [g8fzk@g8fzk.fsnet.co.uk]
Verzonden: zaterdag 28 augustus 2010 17:53
Aan: rsgb_lf_group@= blacksheep.org
Onderwerp: Re: LF: ros -MF 502 K -on now-

G..

Could be a problem with= the sound card when I tried to run the two&= nbsp; modes , , cmsk lock's to 8KHz and ROS needs 48Khz&= nbsp; , result was , ros did not decode after the initial fram= e lock .. may of changed now , the driver panel for the m-audio card shows the sampl= e rate

From: Gary - G4WGT

Sent: Saturday, August 28, 2010 4:33 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: ros -MF 502 K -on now-

Rik, LF,

Sending CMSK8 between grahams ROS but on 502.3kHz dial USB.

Any reports will be welcome.

Gary - G4WGT.

On 28 August 2010 16:22, Graham <g8fzk@g8fzk.fsnet.co.uk<= /a>> wrote:

Thanks Rik

That is useful ! .. will leave= it running for a while

I was not sure if the 'repairs'= to the Ae had

reduced the efficiency , as I= used to be able

to decode via the delft web-sdr= ,in the day but as yet

no decodes

G .

nb, you have caught the&n= bsp; start and stop frames

CD DE G0NBD IN IO83LK

From: Rik Strobbe

Sent: Saturday, August 28, 2010 4:15 PM

To: rsgb_lf_group@blacksheep.org

Subject: RE: LF: ros -MF 502 K -on now-

Graham:

RX1:
15:05 @ 2,1 Hz: SQ DE G0NBD P[*2![?LJA&a= mp; <STOP> -33 dB

not too bad for a 600km= path in daylight

73, Rik ON7YD - OR= 7T

Van: owner-rsgb_lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org] namens Graham= [g8fzk@g8fzk.fsnet.co.uk]<= br> Verzonden: zaterdag 28 augustus 2010 16:00
Aan: rsgb_lf_group@= blacksheep.org
Onderwerp: Re: LF: ros -MF 502 K -on now-

couple of glitches

back at 1457 local 100 wa= tts mf-1

rx 502 usb -ON-

From: Graham

Sent: Saturday, August 28, 2010 12:42 PM

To: rsgb_lf_group@blacksheep.org

Subject: LF: ros -MF 502 K -on now-

Running ROS -MF-1 beacon=

tx/rx 502 K usb

rx - 502 K

beacon in auto reply &nb= sp;

50 watts to Ae

tnx Gary for auto spot