Return-Path: Received: from mtain-dd04.r1000.mx.aol.com (mtain-dd04.r1000.mx.aol.com [172.29.64.144]) by air-md04.mail.aol.com (v127_r1.1) with ESMTP id MAILINMD044-8b834b75e7d3e5; Fri, 12 Feb 2010 18:44:19 -0500 Received: from post.thorcom.com (post.thorcom.com [193.82.116.20]) by mtain-dd04.r1000.mx.aol.com (Internet Inbound) with ESMTP id 5485B380003C4; Fri, 12 Feb 2010 18:44:16 -0500 (EST) Received: from majordom by post.thorcom.com with local (Exim 4.14) id 1Ng5A2-0005j9-AR for rs_out_1@blacksheep.org; Fri, 12 Feb 2010 23:42:58 +0000 Received: from [193.82.116.32] (helo=relay1.thorcom.net) by post.thorcom.com with esmtp (Exim 4.14) id 1Ng5A1-0005j0-9I for rsgb_lf_group@blacksheep.org; Fri, 12 Feb 2010 23:42:57 +0000 Received: from mail-px0-f191.google.com ([209.85.216.191]) by relay1.thorcom.net with esmtp (Exim 4.63) (envelope-from ) id 1Ng59x-0005vF-5z for rsgb_lf_group@blacksheep.org; Fri, 12 Feb 2010 23:42:57 +0000 Received: by pxi29 with SMTP id 29so1808108pxi.1 for ; Fri, 12 Feb 2010 15:42:45 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=domainkey-signature:mime-version:sender:received:in-reply-to :references:date:x-google-sender-auth:message-id:subject:from:to :content-type; bh=sDAZ5w4iIgBDzE7hod2xnOO631jvG8w9m5D2djILE/8=; b=surkKDPud/8mdbLi65/xVOKcD9mqxHko3s8hwLIxHm6dhQifez9CfDHA6iDJG4aYJm 4TRMLJySJtNEhKiGXmgF3i/ki4fq2/5Wref6AKqSQquM5VUAi5Dia7PPXMhfBLikddL+ CvHZ6xdIYRwZurNX2oI8JmLw4pbEnalPfEx7U= DomainKey-Signature: a=rsa-sha1; c=nofws; d=googlemail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:content-type; b=p1Cdm0w4plnInin7acCIOhXr4TWumdqWrYyp8YGq4a8mK+2WD8vSENbRit3VeQMSpB n1IHNid44ow1tj1u8f6K0O24vJaVjX66pJevv6q/DhnkdMWqV1Y9fQBwvfxab6A75Zbk vSTCbZTsiiV6fd5GcJH1wJ7WyhufZIv5il2W8= MIME-Version: 1.0 Received: by 10.141.2.7 with SMTP id e7mr1432629rvi.16.1266018160683; Fri, 12 Feb 2010 15:42:40 -0800 (PST) In-Reply-To: <018401caac31$457c00d0$0217aac0@desktop> References: <1f0624b91002111241h13d2673dt7fc8247decd2459d@mail.gmail.com> <032C9A68AD364778A688994CF9FBB7DE@JimPC> <9afca2641002111458v620ed392x42b88cda05518a38@mail.gmail.com> <00d001caab70$a563fa00$0217aac0@desktop> <9afca2641002120712o56a541aepc0cefccef181f789@mail.gmail.com> <1f0624b91002121107u5a99f7ccib42fb0574caec67b@mail.gmail.com> <015901caac17$683af500$0217aac0@desktop> <1f0624b91002121137t5134dbf1l5db8f44418d3e33a@mail.gmail.com> <018401caac31$457c00d0$0217aac0@desktop> Date: Fri, 12 Feb 2010 23:42:40 +0000 X-Google-Sender-Auth: 2b7dc019e3dcdfc3 Message-ID: <1f0624b91002121542t470b34f2u84ce1792e6870730@mail.gmail.com> From: Gary - G4WGT To: rsgb_lf_group@blacksheep.org DomainKey-Status: good (testing) X-Spam-Score: 0.3 (/) X-Spam-Report: autolearn=disabled,HTML_FONT_BIG=0.256,HTML_MESSAGE=0.001 Subject: Re: LF: Re: 503.600 kHz WSPR Content-Type: multipart/alternative; boundary=000e0cd11886bf2c1c047f6fd237 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on post.thorcom.com X-Spam-Level: X-Spam-Status: No, hits=0.4 required=5.0 tests=HTML_60_70, HTML_FONTCOLOR_UNKNOWN,HTML_FONT_BIG,HTML_MESSAGE,LINES_OF_YELLING, LINES_OF_YELLING_2 autolearn=no version=2.63 X-SA-Exim-Scanned: Yes Sender: owner-rsgb_lf_group@blacksheep.org Precedence: bulk Reply-To: rsgb_lf_group@blacksheep.org X-Listname: rsgb_lf_group X-SA-Exim-Rcpt-To: rs_out_1@blacksheep.org X-SA-Exim-Scanned: No; SAEximRunCond expanded to false x-aol-global-disposition: G X-AOL-SCOLL-AUTHENTICATION: mail_rly_antispam_dkim-d276.2 ; domain : googlemail.com DKIM : fail x-aol-sid: 3039ac1d40904b75e7d0320d X-AOL-IP: 193.82.116.20 X-Mailer: Unknown (No Version) --000e0cd11886bf2c1c047f6fd237 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable OK Jim, I saw your signal trace good enough for a decode but nothing, I think you are late due to PC clock error. Yes, we will try again, I am sure we can make the QSO. Cheers es Good Night, Just off to bed. Gary. On 12 February 2010 22:18, James Cowburn wrote: > Hi Gary > > > > I got multiple decodes of your CQ all around the -12dB mark and I replie= d > but to no avail. I saw you=92d gone QRT so I=92m back on 502.4 > > > > We will have to try again another evening > > With best regards > > > > > > *Jim* > > > > > > Dr. James Cowburn > > E james.cowburn@virgin.net > > ** > ------------------------------ > > *From:* owner-rsgb_lf_group@blacksheep.org [mailto: > owner-rsgb_lf_group@blacksheep.org] *On Behalf Of *Gary - G4WGT > *Sent:* 12 February 2010 19:38 > > *To:* rsgb_lf_group@blacksheep.org > *Subject:* Re: LF: Re: 503.600 kHz WSPR > > > > Jim, > > > > We are all "Bozo's" at some point in time :-)) > > > > Are you wanting to try WSPR 2 way again tonight ? > > > > 73, Gary - G4WGT. > > On 12 February 2010 19:13, James Cowburn wrot= e: > > A bozo I will be!! > > > > > ------------------------------ > > *From:* owner-rsgb_lf_group@blacksheep.org [mailto: > owner-rsgb_lf_group@blacksheep.org] *On Behalf Of *Gary - G4WGT > *Sent:* 12 February 2010 19:07 > > > *To:* rsgb_lf_group@blacksheep.org > *Subject:* Re: LF: Re: 503.600 kHz WSPR > > > > Roger, Jim, > > > > I find it slightly different to Jim's description in such that if while= in > monitor mode or calling CQ you see a station's call decoded all you need= to > do is "double click" the callsign & the software will place the call sig= n in > the correct places in the message boxes. All you need to know then is wh= ich > Tx reply to use. There is a guide in the "help" menu. > > > > I found that the "The Complete Bozo's Guide to JT65A by Andy K3UK" was= most > enlightening. The JT65A mode is very very similar to JT4A & WSPR 2 way= (QSO) > mode. > > > > You can find it at :- > > > > http://www.obriensweb.com/bozoguidejt65a.htm > > > > Cheers, Gary - G4WGT. > > > > On 12 February 2010 15:12, Roger Lapthorn wrot= e: > > Thanks Jim. We'll have to give this a go next week. > > 73s > Roger G3XBM > > > > On 11 February 2010 23:19, James Cowburn wrot= e: > > Hi Rog > > > > Run the WSJT7 programme and select wspr mode > > > > If you receive a signal in the window using the spectrum display click= on > it and click decode > > > > When you have callsign and locator decoded in the main window, enter the= se > in the relevant boxes and then click on gen stnd msges on the right hand > side and it will enter the right text for each message on TX1 to Tx5 > > > > If the sending station is =93going first=94 then you send the 2nd/4th me= ssages > and 73s after each is how I see it. > > > > CQ is message 6 > > > > A lot quicker than QRSS but do watch out for the Witchfinder General as= he > will burn you at the stake!! > > > > > > > > With best regards > > > > > > *Jim* > > > > > > Dr. James Cowburn > ------------------------------ > > *From:* owner-rsgb_lf_group@blacksheep.org [mailto: > owner-rsgb_lf_group@blacksheep.org] *On Behalf Of *Roger Lapthorn > *Sent:* 11 February 2010 22:58 > *To:* rsgb_lf_group@blacksheep.org > *Subject:* Re: LF: Re: 503.600 kHz WSPR > > > > Gary/Jim/Jim, > > Not having tried WSPR in QSO mode, can you clarify the method/procedures > used please? Must give this a try too. > > 73s > Roger G3XBM > > On 11 February 2010 22:37, James Moritz > wrote: > > Dear Gary, Jim, LF Group, > > Thanks for the WSPR QSOs with Gary: > > 213202 13 0 -0.5 -6 0 CQ G4WGT IO83 > 213602 10 -2 -0.3 -5 0 M0BMU S1 > 213602 16 4 -0.2 6 0 G7NKS IO92 20 > 214002 13 4 -0.3 -5 0 M0BMU S1 > 214402 16 -1 -0.5 -5 0 M0BMU R S6 > 214402 17 5 -0.5 6 0 G7NKS IO92 20 > 214802 13 0 -0.3 -5 0 73 DE G4WGT IO83 > > And Jim: > > 221002 10 4 -0.4 31 0 M0BMU S2 > 221402 10 4 0.0 31 0 G7NKS RRR > 221802 9 5 -0.5 31 0 73 DE G7NKS IO92 > > Well, at least it's quicker than QRSS! > > Cheers, Jim Moritz > 73 de M0BMU > > ----- Original Message ----- From: "Gary - G4WGT" > To: "LF Group (RSGB)" > Sent: Thursday, February 11, 2010 8:41 PM > Subject: LF: 503.600 kHz WSPR > > Hi, > > If there is someone interested out there I am running WSPR 2 way tonight= on > 503.600 kHz, dial set at 502.100 kHz USB. > > Please look (monitor) for my signal. Reports & replies/calls will be > welcome. > > 73, Gary - G4WGT. > > > > > > > -- > > http://g3xbm-qrp.blogspot.com/ > http://www.g3xbm.co.uk > http://www.youtube.com/user/G3XBM > G3XBM GQRP 1678 ISWL G11088 > > > > > -- > > http://g3xbm-qrp.blogspot.com/ > http://www.g3xbm.co.uk > http://www.youtube.com/user/G3XBM > G3XBM GQRP 1678 ISWL G11088 > > > > > --000e0cd11886bf2c1c047f6fd237 Content-Type: text/html; charset=windows-1252 Content-Transfer-Encoding: quoted-printable OK Jim,

I saw your signal trace good enough for a decod= e but nothing, I think you are late due to PC clock error.

<= /div>
Yes, we will try again, I am sure we can make the QSO.

Cheers es Good Night,

Just off to= bed.

Gary.

On= 12 February 2010 22:18, James Cowburn <james.cowburn@virgin.net> wro= te:

Hi Gary

=A0

I got multiple= decodes of your CQ all around the -12dB mark and I replied but to no avail. =A0=A0I saw you=92d gone QRT= so I=92m back on 502.4

=A0

We will have to= try again another evening

With best regard= s

=A0

=A0

Jim

=A0

=A0

Dr. James Cowbur= n

E james.cowburn@virgin.n= et=

=A0=

=A0

Jim,

=A0

We are all "Bozo's" at some point in= time :-))

=A0

Are you wanting to try WSPR 2 way again tonight ?<= /span>

=A0

73, Gary - G4WGT.

On 12 February 2010 19:13, James Cowburn <james.cowburn@vir= gin.net> wrote:

A bozo I will be= !!

=A0

=A0

=A0

Roger, Jim,

=A0

I find it slightly different to Jim's description in such that if while in monitor mode= or calling CQ you see a station's call decoded all you need to do is "double click" the callsign & the software will place the call sign in th= e correct places in the message boxes. All you need to know then is which Tx reply to use. There is a guide in the "help" menu.=

=A0

I found that the "The Complete Bozo's Guide to JT65A by Andy K3UK" was most enlightening. The JT65A mode is very very similar to JT4A & WSPR 2 way (QSO) mode.

=A0

You can find it at :-

=A0

=A0

Cheers, Gary - G4WGT.

=A0

On 12 February 2010 15:12, Roger Lapthorn <rogerlapthorn@gmail.com> wrote:

Thanks Jim. We'll have to give this a go next week.

73s
Roger G3XBM

=A0

On 11 February 2010 23:19, James Cowburn <james.cowburn@virgin.net> wrote:

Hi Rog

=A0

Run the WSJT7 pr= ogramme and select wspr mode

=A0

If you receive= a signal in the window using the spectrum display click on it and click decode

=A0

When you have ca= llsign and locator decoded in the main window, enter these in the relevant boxes and then click on gen stnd msges on the right= hand side and it will enter the right text for each message on TX1 to Tx5

=A0

If the sending= station is =93going first=94 then you send the 2nd/4th messages and 73s after each is how I see it.

=A0

CQ is message 6<= /span>

=A0

A lot quicker th= an QRSS but do watch out for the Witchfinder General as he will burn you at the stake!!

=A0

=A0

=A0

With best regard= s

=A0

=A0

Jim

=A0

=A0

Dr. James Cowbur= n

=A0

Gary/Jim/Jim,

Not having tried WSPR in QSO mode, can you clarify the method/procedures= used please? Must give this a try too.

73s
Roger G3XBM

On 11 February 2010 22:37, James Moritz <james.moritz@btopenworld.com> wrote:

Dear Gary, Jim, LF Group,

Thanks for the WSPR QSOs with Gary:

213202 =A013 =A0 0 -0.5 =A0 =A0-6 =A00 =A0CQ G4WGT IO83
213602 =A010 =A0-2 -0.3 =A0 =A0-5 =A00 =A0M0BMU <G4WGT> S1
213602 =A016 =A0 4 -0.2 =A0 =A0 6 =A00 =A0G7NKS IO92 20
214002 =A013 =A0 4 -0.3 =A0 =A0-5 =A00 =A0M0BMU <G4WGT> S1
214402 =A016 =A0-1 -0.5 =A0 =A0-5 =A00 =A0M0BMU <G4WGT> R S6
214402 =A017 =A0 5 -0.5 =A0 =A0 6 =A00 =A0G7NKS IO92 20
214802 =A013 =A0 0 -0.3 =A0 =A0-5 =A00 =A073 DE G4WGT IO83

And Jim:

221002 =A010 =A0 4 -0.4 =A0 =A031 =A00 =A0M0BMU <G7NKS> S2
221402 =A010 =A0 4 =A00.0 =A0 =A031 =A00 =A0<M0BMU> G7NKS RRR
221802 =A0 9 =A0 5 -0.5 =A0 =A031 =A00 =A073 DE G7NKS IO92

Well, at least it's quicker than QRSS!

Cheers, Jim Moritz
73 de M0BMU

----- Original Message ----- From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>=
To: "LF Group (RSGB)" <rsgb_lf_group@blacksheep.org>
Sent: Thursday, February 11, 2010 8:41 PM
Subject: LF: 503.600 kHz WSPR

Hi,

If there is someone interested out there I am running WSPR 2 way tonight= on
503.600 kHz, dial set at 502.100 kHz USB.

Please look (monitor) for my signal. Reports & replies/calls will be welcome.

73, Gary - G4WGT.

=A0




--

http://g3xbm-= qrp.blogspot.com/
http://www.g3xbm.co.u= k
http://www= .youtube.com/user/G3XBM
G3XBM =A0 =A0GQRP 1678 =A0 =A0 =A0ISWL G11088




--

http://g3xbm-= qrp.blogspot.com/
http://www.g3xbm.co.u= k
http://www= .youtube.com/user/G3XBM
G3XBM =A0 =A0GQRP 1678 =A0 =A0 =A0ISWL G11088

=A0

=A0


--000e0cd11886bf2c1c047f6fd237--