Message-ID: <20090204230924.j0lknqzmbk5c0o4w@webmail4.kuleuven.be>
Date: Wed, 04 Feb 2009 23:09:24 +0100
From: Rik Strobbe <Rik.Strobbe@fys.kuleuven.be>
To: rsgb_lf_group@blacksheep.org
References: 	<01eb01c9832c$74945e50$a402a8c0@Inspiron><20090131111012.i80joik1ztc0wggk@webmail4.kuleuven.be><AD8469FDDC2A4CE1A2AD0DA3753E415C@JimPC><000f01c983b5$cfe04330$8d01a8c0@JAYDELL><20090131200626.39efb3dc@lurcher>
	<071798B2D2F8408E9570FC11F569524C@AGB><27CD4CCC51DF4FEBB3972EA48A91D068@AGB>
	<20090204223221.yd4hyv5n06ko8c44@webmail4.kuleuven.be>
	<012501c98712$89385020$6401a8c0@asus>
In-Reply-To: <012501c98712$89385020$6401a8c0@asus>
MIME-Version: 1.0
Content-Disposition: inline
User-Agent: Internet Messaging Program (IMP) H3 (4.1.2)
Subject: RE: LF: Olivia 500 x 8  MFSK16  NOW RUNNING
Content-Type: text/plain;
	charset=ISO-8859-1;
	DelSp="Yes";
	format="flowed"
Content-Transfer-Encoding: quoted-printable
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Gary,

thanks for the info.
Both 502 and 503 are audible here.
I am not sure I can handle 2 instances of multipsk today, my eyes =20
still need to adapt to the colorfull display  and I am overwhelmed by =20
all the options ;-)
I will try to get the MFSK16 signal, that should be the most robust.

But as my out-of-bed time is 05:00UTC I will close down at 22:15UT

73, Rik  ON7YD - OR7T

Quoting Gary - G4WGT <g4wgt@tiscali.co.uk>:

> Rik,
>
> Open two instances of Multipsk, set the receiver to 501KHz USB.
>
> On one Multipsk select MFSK16 & click the cursor at 1000 on the waterfall=20=
&
> on the other Multipsk select Olivia then the Olivia mode to 8x500, button
> just over the waterfall then click the cursor on 2000.
>
> You should now be up & running both modes.
>
> 73
>
> Gary - G4WGT.
>
>
> -----Original Message-----
> From: owner-rsgb_lf_group@blacksheep.org
> [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Rik Strobbe
> Sent: 04 February 2009 21:32
> To: rsgb_lf_group@blacksheep.org
> Subject: Re: LF: Olivia 500 x 8 MFSK16 NOW RUNNING
>
> Graham,
>
> I just installed multipsk.
> I believe it is the most chaotic programme I have ever seen.
>
> Right now 21:28UTC I hear alternating signals on 502 and 503.
>
> As I am not in the mood of reading the multipsk manual today could you
> just tell me what mode is running where and what dial frequency / mode
> (USB or LSB) I should set the RX to?
>
> 73, Rik  ON7YD - OR7T
>
> Quoting Graham <g8fzk@g8fzk.fsnet.co.uk>:
>
>> Modes changed
>>
>> MT63   STOPPED
>>
>> MFSK16 ,  Centre freq   1000 Hz audio
>>
>> Approx  15 watts peak per stream
>>
>> Thanks for reports .. will run this config  an hour or so
>>
>> G ..
>>
>> --------------------------------------------------
>> From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
>> Sent: Wednesday, February 04, 2009 7:39 PM
>> To: <rsgb_lf_group@blacksheep.org>
>> Subject: LF: If anyones about , MT63  x 500 Hz and Olivia 500 x 8
>> running now 1935 hrs
>>
>>>
>>> As a follow on to some tests  with Gary  , with Olivia  500 x 8 and the
>>> original MT63 system
>>>
>>> Running  two  data streams now at about 10  watts per mode , carrier
>>> frequencies are :-
>>>
>>> mt63   501.5 to  502 Khz
>>>
>>> olivia 500x8  503 Khz +/-  250 Hz
>>>
>>> The book says mt63 should not print as well as olivia .....
>>>
>>> tnx - G ..
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date:
>>> 02/03/09 17:48:00
>>>
>
>
>
> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
>
>
>
>



Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm