From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
To: <rsgb_lf_group@blacksheep.org>
References: <A9CB808898954C77A61D0EDF0769A15C@AGB> <005101c980e7$d73f2450$a402a8c0@Inspiron>
Date: Wed, 28 Jan 2009 12:42:39 -0000
Message-ID: <004b01c98145$e7c20af0$6401a8c0@asus>
MIME-Version: 1.0
In-Reply-To: <005101c980e7$d73f2450$a402a8c0@Inspiron>
Thread-Index: AcmA35hr5hte9oQNQpicRL6vVQXByAAAoDOwABjJeiA=
Subject: LF: RE: RE: M0LMH in WSPR  had to  look twice !
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Sender: owner-rsgb_lf_group@blacksheep.org
Precedence: bulk
Reply-To: rsgb_lf_group@blacksheep.org


Hi Lee, LF,

Good to see you transmitting on the band Lee. I looked back at my WSPR log &
despite you starting on the same frequency I was using there was no
conflict, thanks for the QSY.

Nice going for 10mW & if you were using separate Tx & Rx it would be
difficult to align the two devices.

I look forward to seeing/hearing you again.

73

Gary - G4WGT.

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org
[mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Lee Hudson
Sent: 28 January 2009 01:29
To: rsgb_lf_group@blacksheep.org
Subject: LF: RE: M0LMH in WSPR had to look twice !

Hi Jim, John, Graham, Gary, LF Group,

With one month remaining on the NoV (before renewal!!) I thought it time to
put the station on the air.
It's taken long enough to put it all together, from nothing!
My junk box doesn't normally contain much in the line of RF parts, HI.

So thought I have a try at WSPR and see who hears my mere 10mW first
transmission.

Well to be honest I'm most surprised with the reports from GM4SLV @
700miles.
Thanks for tuning down for a listen, John.

Apologies to Gary for transmitting on his frequency on the first
transmission.
I don't think we doubled as it turns out, since you gave me a report!!

I have an odd issue too with the sound card I use in that the TX/RX
frequencies are about 12Hz different,
But this is only when using the WSPR software.

Hence two corrections, first to line Jim up on RX then another to get my TX
frequency where I intended 503.930kHz.

Thanks go to those who have given words of advice from time to time over the
past 6 months.
And John Gould (RSGB HF Manager) for giving me some encouragement in the
first place to attempt the NoV application and also for giving it the once
over before it was officially posted.

73,
Lee M0LMH,
IO93gx



-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org
[mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Graham
Sent: 28 January 2009 00:29
To: rsgb_lf_group@blacksheep.org
Subject: LF: M0LMH in WSPR had to look twice !


Thought I had a false decode of Jim .. but it was real hi

090128 0010  18 -13  0.9   0.503930  M0LMH IO93 10           0     1    0
090128 0012  34   3  0.6   0.503900  M0BMU IO91 30           0     1    0
090128 0018  30  -2  0.5   0.503900  M0BMU IO91 30           0     1    0
090128 0018  19 -11  0.8   0.503931  M0LMH IO93 10           0     1    0

Something is very wrong with the lf set up  I did not decode Gary all night
and not all of Jims signals decoded  either

So using the ft897-d with the ads/usb sound card , every trace is decoding
so .. looks like the sound card is the problem as the rx and tx had similar
problems ..

wonderful ...

G ..